Top 14 how to remove flapper from toilet

Below is the best information and knowledge about how to remove flapper from toilet compiled and compiled by the hkfindall.com team, along with other related topics such as:: how to remove a hard plastic toilet flapper, how to replace toilet flapper american standard, how to fix toilet flapper that stays up, how to replace toilet flapper and fill valve, are toilet flappers universal, toilet flapper valve types, replacing toilet flapper valve assembly, replacing toilet flapper seal.

how to remove flapper from toilet

Image for keyword: how to remove flapper from toilet

The most popular articles about how to remove flapper from toilet

How to Replace a Toilet Flapper – Fluidmaster

  • Author: www.fluidmaster.com

  • Evaluate 3 ⭐ (10210 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Replace a Toilet Flapper – Fluidmaster Repair when Not in Use · To remove the existing flapper, first turn off the water to the toilet and flush toilet tank emptying most of the water. · To install new …

  • Match the search results: Toilet flappers are the leading cause of leaking or running toilets – they provide the seal for the flush valve and control the volume of water released to the bowl. Flappers wear out more often if you use drop-in bleach tablets. Instead use Flush ‘n Sparkle™ Self-Cleaning Toilet System and protect …

  • Quote from the source:

DIY Plumbing: How to Repair a Worn-Out Toilet Flapper

  • Author: www.smithsplumbingservice.com

  • Evaluate 3 ⭐ (15401 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about DIY Plumbing: How to Repair a Worn-Out Toilet Flapper Step 1: Shut Off Your Toilet & Drain the Tank · Step 2: Remove the Old Flapper · Step 3: Install the New Flapper · Step 4: Turn the Water Back On.

  • Match the search results: Remove the lid from your toilet tank and you should find it empty. The
    flapper will be located at the bottom center of the tank, covering the
    drain that leads to your toilet bowl. It’ll also be connected to
    your toilet’s flush handle via a small metal chain or nylon string.
    S…

  • Quote from the source:

How to Fix a Leaky Toilet Flapper – The Home Depot

  • Author: www.homedepot.com

  • Evaluate 3 ⭐ (3451 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Fix a Leaky Toilet Flapper – The Home Depot Flappers are usually attached to the small lugs on the sides of the overflow pipe. If the replacement flapper you purchase has a plastic or molded ring between …

  • Match the search results:
    Reference #18.1433431b.1648740935.90d5b31e

  • Quote from the source:

Changing Your Toilet Flapper | Apartment Therapy

  • Author: www.apartmenttherapy.com

  • Evaluate 3 ⭐ (12470 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Changing Your Toilet Flapper | Apartment Therapy Flush the toilet to drain the tank. Remove the existing flapper by reaching in and disconnecting its side hooks. Slowly pull the round …

  • Match the search results: Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.

  • Quote from the source:

How to Replace Toilet Flappers – PlumbingSupply.com

  • Author: www.plumbingsupply.com

  • Evaluate 4 ⭐ (31397 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Replace Toilet Flappers – PlumbingSupply.com How To Replace A Toilet Flapper · Step 1: Remove tank lid. · Step 2: Turn off water supply. · Step 3: Remove the water in the toilet tank. · Step 4: Remove old …

  • Match the search results: It is best to first determine which type of flapper you will need since most flappers are made for a specific toilet and are not interchangeable with other flappers. You should make sure to replace your flapper with one that looks exactly like your flapper. It does not necessarily need to be the sam…

  • Quote from the source:

DIY Tip: How to Replace a Worn-Out Toilet Flapper – Moe …

  • Author: www.moeplumbing.com

  • Evaluate 4 ⭐ (24764 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about DIY Tip: How to Replace a Worn-Out Toilet Flapper – Moe … Now all you have to do is reverse the steps with the new flapper. Place the new one in the tank and make sure it seats nicely with the drain at …

  • Match the search results: Now all you have to do is reverse the steps with the new flapper. Place the new one in the tank and make sure it seats nicely with the drain at the bottom of the tank. If it does, loop both of the hinges back onto the overflow pipe flanges in your tank. The flapper should still seal your drain compl…

  • Quote from the source:

How To Replace a Toilet Flapper – DIY Video – Advantage …

  • Author: azinspect.com

  • Evaluate 3 ⭐ (11198 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How To Replace a Toilet Flapper – DIY Video – Advantage … Turn off the water to the toilet. · Remove the lid on the toilet tank. · Flush the toilet to empty the water from the tank. · Disconnect the flapper chain from the …

  • Match the search results: If you have a toilet that intermittently flushes on its own, or you can hear water running, the problem may be an old leaky flapper valve. The flapper valve is basically a large rubber or silicone check valve that prevents water from constantly seeping into the toilet bowl. It opens to allow water t…

  • Quote from the source:

Fix a Running Toilet and Toilet Flapper – The Family Handyman

  • Author: www.familyhandyman.com

  • Evaluate 4 ⭐ (34847 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Fix a Running Toilet and Toilet Flapper – The Family Handyman If replacing the flapper alone didn’t work, look for a flapper kit that contains a flush seat repair. · Start by closing the toilet flapper valve …

  • Match the search results: Few household annoyances are quite as maddening as the sound of a constantly running toilet. If you hear your toilet refilling too often, or if you hear the steady hiss of running water, the flapper may be leaking. The flapper (aka “flush valve seal”) is the plug that falls against the drain hole (f…

  • Quote from the source:

How to Change a Toilet Flapper – Any Hour Services

  • Author: anyhourservices.com

  • Evaluate 3 ⭐ (3887 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Change a Toilet Flapper – Any Hour Services SHUT OFF WATER & REMOVE LID · FLUSH TOILET TO DRAIN TANK · REMOVE CHAIN FROM FLUSH ARM · REMOVE THE OLD FLAPPER · CHECK & CLEAN FLUSH VALVE · CONNECT …

  • Match the search results: Then, you just repeat those steps in reverse order to install the new flapper. Connect the new flapper to the base of the flush valve with the two tabs. The, connect the chain to the chain arm. Now, if you have excess chain, you want to adjust the length. You don’t want to have too much play in the …

  • Quote from the source:

Toilet Flapper & Seal Replacements – Korky

  • Author: www.korky.com

  • Evaluate 4 ⭐ (32595 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Toilet Flapper & Seal Replacements – Korky Toilet Flapper & Seal Replacement: Invented by Korky in the 1950’s, the original toilet flapper is the preferred choice among plumbing pros.

  • Match the search results: Invented by Korky in the 1950’s, the original toilet flapper is the preferred choice among plumbing pros. With a wide array of flappers, our universal and specific fit flappers are sure to meet the needs of your toilet.

  • Quote from the source:

Replacing a Toilet Flapper (in Less Than 30 Minutes!) – 1-Tom …

  • Author: www.1tomplumber.com

  • Evaluate 3 ⭐ (10610 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Replacing a Toilet Flapper (in Less Than 30 Minutes!) – 1-Tom … Begin by turning off the water supply valve. · Flush the toilet to empty the tank and sponge dry the tank. · Unscrew the old flapper from the lift …

  • Match the search results: The flapper itself is usually made of rubber but might be made of plastic. In either case, the underside should be completely smooth. There should be no indication of wear, rips, or cracks. If you see any of these, then replacing a toilet flapper is the right move.

  • Quote from the source:

How to fix a Leaking TOILET FLAPPER valve Step … – Ecohome

  • Author: www.ecohome.net

  • Evaluate 3 ⭐ (17716 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to fix a Leaking TOILET FLAPPER valve Step … – Ecohome Removing the old toilet flapper takes a little dexterity and care, as the arms need to be twisted off the plastic carrier arms. Holding the end …

  • Match the search results: Older toilets (as in the ones more likely to need such repairs) often consume far more water than needed per flush, so taking up space in the reservoir with rocks, or a brick perhaps, can save a lot of water per flush. If you find the toilet is not flushing well with rocks to take up volume, then us…

  • Quote from the source:

How to Replace a Toilet Flapper – Toiletology

  • Author: toiletology.com

  • Evaluate 4 ⭐ (35283 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Replace a Toilet Flapper – Toiletology Turn off the water shutoff valve located behind the toilet and let the tank empty of water. Soak up any leftover water with a sponge. Use a …

  • Match the search results: A toilet flapper is a pretty simple device that sits in your toilet. It sits inside the tank and sort of resembles a plug. Its job is to open or close, allowing more water into the tank or keeping water out. Toilet flappers tend to last for five to ten years so it’s not something that you need…

  • Quote from the source:

Toilet Flappers at Lowes.com

  • Author: www.lowes.com

  • Evaluate 4 ⭐ (34484 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Toilet Flappers at Lowes.com It’s normal for this part to wear out over time, so the need to replace toilet flappers is just part of maintaining a toilet. Luckily, Lowe’s has what you need …

  • Match the search results:
    Reference #18.1633431b.1648740986.9e8e6c2c

  • Quote from the source:

Multi-read content how to remove flapper from toilet

To remove toilet cleaner, first turn off the water supply to the toilet. Then remove the toilet lid and flush the toilet until it is empty. From there, locate the lever and remove the chain that connects to the lever. To completely remove an open loop rigid plastic spacer, remove the post arms from the overflow pipe. If your clapper has closed loop branches, pull the clapper aside as far as you can and slide the loop out of the end of the post. If this is not possible due to the shape of the post and the stiffness of the clapper plastic, use a handy knife to cut off the hard plastic clapper arms. You can then remove the pad and replace it.

How to remove a hard plastic toilet flapper

Contents

How do you know if your toilet seat covers need to be replaced? 5 steps to remove hard plastic toilet paper

How do you know if your toilet seat covers need to be replaced?

If your toilet isn’t full, takes a long time to fill after flushing, or the toilet runs intermittently, you may need to replace the drain. The gasket is a rubber gasket that blocks the drain hole that drains to flush the toilet. When you turn the toilet handle, the lid opens and sends water to flush the toilet. If the gasket is in poor condition, it will not form a good seal, allowing water to seep in.

Signs you need to change your toilet seat:

  • The toilets will not be full.
  • The toilets run intermittently between flushes.
  • Water runs in the toilet between flushes.

Rubber gaskets break or harden over time, causing them to seal poorly and stop working. Also, if you temporarily remove a toilet (such as during a renovation) and allow the seal to dry out, it may not rehydrate and seal properly once the toilet is reconnected and flushed. This mainly happens in the case of legacy applications.

5 Steps to Remove Hard Plastic Toilet Lid

A leaky drain wastes water and leads to a poorly functioning toilet. This is a common cause of frustration that occurs with all types of toilets. The good news is that you can easily remove and replace a hard plastic toilet seat liner without any prior plumbing experience.

Turn off the tap

Before taking any further action, locate the water supply valve. This is usually a small handle on the pipe that rises from the floor, with the water inlet under the toilet. Turn the handle clockwise to tighten, shut off water flow to the toilet.

Remove the barrel cover

Remove the toilet seat cover and set it aside safely where it won’t be clogged and in good condition. Once the tank cover is removed, you will be able to locate the cover. This is usually a red or blue seal on the bottom of the tank. A chain will run down from the wiper to the top of the exhaust. As you turn the handle to flush the toilet, the chain tightens and lifts the flush handle.

Flush the toilet

Once the tank is removed, flush the toilet to empty the tank. When the water supply is turned off in step 1, new water will not flow into the tank. However, several rinses may be required to fill the tank. If necessary, hold the drain handle down to keep the drain hose open, allowing water to drain from the tank.

Open clamshell chain

Once you have flushed the toilet, you can begin to flush the toilet. Begin by removing the chain from the drain hose where it attaches to the drain handle at the top of the tank. There is usually a clip that allows the end of this chain to be easily removed. Do not attempt to remove the leash from the top of the cushion – most models do not make this task easy.

Remove clapper

When the drain chain doesn’t have a hook, the only thing holding the unloader in place will be two “arms” that are wrapped around a post at the bottom of the overflow pipe. This assembly acts as a hinge allowing the tampon to open and close during flushing. To remove the clapper:

  • If your funnel has open loops on its arm, it should be open on the post at the bottom of the overflow tube. To do this, hold the pole with one hand while gently lifting it above the presenter’s arm with the other hand. The software will not appear from the post. Then repeat this process on the other side and the flapper can be completely removed.
  • If your clapper has closing loops on its arms, it cannot simply be opened off the pole. Instead, the arms should slide off the top of the spine. To do this, pull the lever to the side and push the post in the opposite direction until you can slide the lever arm off the post. Then repeat for the other side.
  • In some cases, your clapper may have become stiff due to age and use, preventing the post from slipping. If so, use a utility knife to cut off the cutter arms. Be careful not to damage the post or other parts of the toilet bowl. Once you’ve cut the exhaust branches, it should be simple to remove the valve and arms separately.

These three methods are the best ways to remove a piece of hard plastic. Since the rubber plane can harden over time, some models designed to bend and fold for easy assembly may no longer do so. In these cases, you will need to cut off the flapper arm to remove it.

Are toilet flappers universal?

Sanitary tools are not common. Depending on your toilet model, you may need a dedicated wiper. To simplify replacing your cover, remove it first. Then take the old cover to a hardware store and look for a replacement to match the one you removed.

  • Sanitary tools are not common. The flush you need depends on the type of toilet you have
  • Remove the old pad before purchasing a replacement.
  • Write down the make and model of your toilet, if possible.
  • Take your old flapper with you when you go to the hardware store for a replacement. Look for a flapper that is similar in style to your old flapper and advertises that it can replace your toilet brand/model. ‘

This simple process will save you extra trips to the hardware store and make it easier for you to get replacement parts. Your local hardware store will likely stock several types of flappers, which will simplify replacement.

How to replace a hard plastic sanitary napkin?

When replacing a hard plastic toilet seat, you should:

  • Shut off the water supply to the toilet.
  • Remove the toilet tank lid.
  • Flush the toilet until the tank is empty.
  • Remove the chain from the lever.
  • Remove the cap from the latches at the bottom of the overflow drain.

In the case of the hard plastic sole, some styles are used to “remove” from the overflow pipe under light pressure, while others are used to slide sideways so the arms can be removed. In some cases, soft masks harden due to use and age. If your clapper is stubborn and cannot be hung, carefully cut the flap wings with a utility knife, then remove the main body of the clapper and remove the detachable arms from the pole.

Popular questions about how to remove flapper from toilet

how to remove flapper from toilet?

InstructionsTurn Off the Water. Turn off the water to the toilet by rotating the shutoff valve, located on the water supply line leading to the toilet, clockwise until it stops. … Remove the Old Flapper. Disconnect the flapper chain from the flush handle lever. … Prepare the New Flapper. … Install the New Flapper.

Can you replace just the flapper on a toilet?

In order to create a proper seal, flappers are generally made from rubber, as it’s inexpensive, flexible, and seats easily. However, the tradeoff is they corrode over time and will generally need to be replaced about every two years or so. There’s more good news: you can replace a toilet flapper yourself!

How do you remove an American Standard toilet flapper?

How much does a plumber charge to replace a flapper?

Plumbers charge either by the hour or by the job, and most will have a minimum call out charge of about $50. Common toilet repairs include: Replace the tank float ball and float rod – $111. Install a new flapper and chain in the tank.

Cost Of Replacement Parts.
Part Cost
Flapper $12–$29

How do you replace a old toilet flapper?

How do you replace a toilet actuator?

How do you replace a flush valve seal?

How do you change a flush valve?

How long does toilet flapper last?

about 4 to 5 years
The average toilet flapper lasts about 4 to 5 years. It is important that you replace your toilet flapper when needed to prevent damaging leaks.

Should you caulk around toilet base?

1. Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.

Are toilet flappers universal?

Are all toilet flappers universal? No. There are universal designs like the Fluidmaster flappers that replace most other flappers and there are specialty flappers for specific flushing systems.

Are there different types of toilet flappers?

There are three main types of toilet flappers: seat disk, tank ball, and rubber.

Where is the toilet flapper?

The toilet flapper is the component inside your toilet tank that lets water flow out of the tank and into the bowl when you flush. This round, rubber disc is attached to the bottom of the overflow tube, usually by mounting arms that hook onto ears on either side of the overflow tube.

What size flapper does American Standard toilet use?

3 inch
3 inch Toilet Tank Flapper Valve Set.

What is an actuator in a toilet?

Older American Standard toilets use a part called an actuator to regulate the flow of water from the toilet’s tank to the bowl. An actuator functions somewhat like a flapper valve in toilets of today, but with a few differences that allow more water to drain out of the toilet’s tank with each flush.

Video tutorials about how to remove flapper from toilet

keywords: #toiletflapper, #toiletflappervalve, #toiletvavle, #replaceatoiletflapper, #fixatoiletflapper, #toiletleaking, #fixaleakingtoilet, #Korky, #howtoinstall, #installation, #flapper

How to Replace a Toilet Flapper with Korky |

Go to

-http://tt.korky.com/

Is your toilet constantly running or turning on and off by itself?

Is the water in the bowl rippling?

Do you have to jiggle your handle for it to stop?

If so your toilet is leaking and flushing money down the drain. The most common cause of a running toilet is a leaky flapper. The flapper is a flexible rubber seal that sits on your flush valve. When you flush, the lever lifts up the flapper letting a rush of water into your bowl. After the flush it falls back into place onto the flush valve, sealing the hole to your bowl. If the flapper is worn or installed incorrectly it can leak water from your tank into the bowl. If you flapper is worn or hard it’s time to replace your flapper. Various toilet manufacturers and models require unique flappers. The toilet brand can usually be found between the toilet seat and the tank. Toilet model numbers are often stamped on the inside back wall of the tank. To find the correct replacement flapper use Toilet Toolbox on our website, or call us and our team will assist you in finding the correct flapper for you toilet.

To replace your flapper, turn off the water supply to your toilet. Flush and hold the lever down to drain to water from your tank. Unhook the flapper chain from the flush lever.

To uninstall the old flapper, unhook or unclip the flapper from the flush valve. If the valve seat is dirty, wipe it off with a cloth or paper towel. Install your new flapper by attaching the flapper ears to the tabs of the flush valve. Attach the flapper chain to the flush lever with minimal slack. Trim any excess chain. Turn the water supply on and let the tank refill.

If you have any questions or need any assistance, please visit our website or call us at 1 800 528 3553.

keywords: #Plumbing(OrganizationType), #Roto-Rooter(Organization), #Valve(Invention), #toiletflapper, #toiletleaking, #toiletflappervalve, #toiletvalve, #replaceatoiletflapper, #fixatoiletflapper, #fixaleakingtoilet, #plumbingtips, #rotorooter, #rotorooter, #howtoreplaceaflappervalve

The most common cause of a leaky toilet is a toilet flapper valve that isn’t quite seating properly at the bottom of the tank. Replacing a toilet flapper valve is a relatively simple fix that could save you a pretty penny on your water bill.

-https://www.rotorooter.com/plumbing-videos/toilet/how-to-replace-your-toilets-flapper-valve/

Steps to replacing a flapper valve:

0:55 – How to replace a flapper valve

0:56 – Shut off water supply valve

1:03 – Remove lid from tank and flush toilet to remove as much water as possible from tank

1:11 – Disconnect the chain from the flush lever

1:16 – Pull the flapper off of the mounting pegs on either side of the overflow tube

1:23 – Wipe off the valve seat at the bottom of the tank to ensure a clean seal

1:27 – Install the new flapper valve where the old one sat and connect the chain back to both the flapper and the flush lever.

1:47 – Turn the water supply back on and let the toilet tank re-fill with water

As always, if you’re having problems or need extra help, give your local Roto-Rooter a call.

-https://www.rotorooter.com/plumbing/toilet-repair/

-https://www.rotorooter.com/blog/toilet/when-to-call-a-plumber-about-a-running-toilet/

keywords: #runningtoilet, #toiletkeepsrunning, #toiletkeepsflushing, #toiletkeepsmakingnoise, #toiletkeepsflushingbyitself, #toiletflushesbyitself, #toiletflushesonitsown, #howtofixarunnytoilet, #toiletflapperhomedepot, #flapper, #toiletflapper, #toiletflapperwon'tseal, #changetoiletflapper, #toilettankleaking, #kohlerflapper, #installtoiletflapper, #installnewflapper, #howtoinstalltoiletflapper, #howtofixtoiletflapper, #toiletflapperseal, #toiletrepair

In this video, we show you How to Change a Toilet Flapper and Fix a running toilet. Usually when you have the problem where your toilet keeps running, or your toilet keeps flushing, or your toilet keeps making noise like a half flush, it is because your toilet flapper is leaking, and that toilet flapper needs to be replaced. Many people suffer from this needed toilet repair, where the toilet flushes on its own and this video will teach you how to fix a runny toilet be removing the old flapper and installing a new toilet flapper. It does not matter whether you have a Kohler flapper or an American Standard flapper, it’s best to measure your toilet flush valve opening, the round hole under your toilet flapper, and usually it is 2″ or 3″, so it is also helpful to bring the toilet flapper with you to Home Depot.

✅ Parts in this running toilet repair video:

✅ Fluidmaster 504 2-Inch Universal Toilet Flapper:

-https://amzn.to/2Z9MY5H

✅ Korky Large 3-Inch Flapper For American Standard Cadet 3 Toilet:

-https://amzn.to/2NbdJEt

Toilet flapper Home Depot

in this video, we’ll also show you what to expect and what you’ll see while shopping for a new toilet flapper down the toilet plumbing aisle in Home Depot.

How to install toilet flapper

to install a new toilet flapper, turn off the water and flush the water to empty out as much water from the toilet tank as possible. The old toilet flapper at the bottom of the toilet tank can now be removed by twisting both hinged ends of the rubber toilet flapper around the retaining hooks on the white plastic pole at the bottom of the toilet tank. You’ll see the old toilet flapper is likely to be slimy and possibly lost its shape or become somewhat limp so it loses the 100% toilet flapper seal, which is why water was leaking from the toilet tank into the toilet bowl, and causing the toilet flushing by itself.

Don’t forget to remove the old flapper chain of the flush lever as well. The new toilet flapper comes with a new chain.Congratulations, you now know how to fix toilet flappers, and this completes your toilet repair, and you saved $100 or more on hiring a plumber to repair your toilet.

keywords: #chiasẻ, #điệnthoạicómáyảnh, #điệnthoạiquayvideo, #miễnphí, #tảilên

Today Mr. Rooter® Plumbing brings you another useful do-it-yourself plumbing tip for your home. This tip should help you save water and silence a familiar noise that is found in many homes. We’re talking about that persistent and annoying running-water noise coming from your toilet. That constant running, draining and gurgling sound is often caused by the toilet flapper—and there’s a very easy fix. To test your flapper and verify it as the source of your problem, just grab a yardstick or another sturdy tool to extend your reach.

Test your toilet flapper

• Open the tank by removing the top and set it aside.

• Locate the flapper in the tank. It’s the round rubber plug on bottom of the tank.

• Use the yardstick to reach into the tank and press down on the flapper.

• If the toilet stops running, you have found the source of the problem.

Replace your toilet flapper

• Purchase a new flapper at the local hardware or home center. At Mr. Rooter Plumbing, we suggest an adjustable flapper to help you save water and money every time you flush.

Remove your old flapper

• Turn off the water supply to your toilet. Find the shut off valve in wall near the floor behind the toilet. Turn it all the way to the right.

• Flush the toilet to drain the tank.

• Remove the existing flapper by reaching in and disconnecting its side hooks. Slowly pull the round rubber flapper/stopper upwards toward you.

• As you bring the old flapper up, release the chain that attaches it to the horizontal trip lever near the top of tank.

Install a new toilet flapper

• Place the new flapper in the tank and attach to the side hooks in the floor of the tank.

• Attach the new flapper’s chain to the trip lever. Be sure to leave enough slack so that the flapper can fully close, covering the flush valve seat.

• Turn the toilet’s water supply back on.

• Flush the toilet to test.

• After the flush is completed, you should hear the welcome sound of silence.

• Replace the top of your tank.

• By investing just a few minutes, you’ve solved an annoying household plumbing problem. With the new flapper, the toilet will flush more efficiently, conserving water and saving you money on your future water bills.

If you have questions about how to replace your toilet flapper or another plumbing problem, call Mr. Rooter at 877-422-4826. We also offer installation, repairs and maintenance of residential plumbing systems. We’re available 24-7 to handle your plumbing emergencies. Call Mr. Rooter Plumbing when you need plumbing help–anytime!

https://www.pinterest.com/pin/fix-a-running-toilet-and-toilet-flapper–249457266829459881/

See more articles in category: FAQS