Best 21 what does a combination square do

Below is the best information and knowledge about what does a combination square do compiled and compiled by the hkfindall.com team, along with other related topics such as:: combination square function, stanley combination square, combination square parts, combination square safety precautions, combination square drawing, combination square purpose, combination square set, combination square vs speed square.

what does a combination square do

Image for keyword: what does a combination square do

The most popular articles about what does a combination square do

How to Use a Combination Square – Pro Tool Reviews

  • Author: www.protoolreviews.com

  • Evaluate 4 ⭐ (38675 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Use a Combination Square – Pro Tool Reviews A depth gauge spans across a hole, channel, or cavity and allows you to measure to the bottom of it. A combination square can do the same thing …

  • Match the search results: As I mentioned, if I could only have one combination square, it would be the 12-inch model. However, 75% of the time, I use my 6-inch square model. I keep my 6-inch square right in my shop apron pocket. Combination squares actually come in sizes up to 24-inches. At that size, I would stick with a 24…

  • Quote from the source:

8 Great ways to use a combination square | WOOD Magazine

  • Author: www.woodmagazine.com

  • Evaluate 4 ⭐ (24301 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about 8 Great ways to use a combination square | WOOD Magazine A combination square helps with two critical tablesaw alignment steps: paralleling the miter-gauge slots and rip fence to the blade. To adjust the miter slots, …

  • Match the search results: Nearly all router-table fences have independent locks on each end, and the fence doesn’t self-square to the miter slot. But parallelism proves critical if you use a miter gauge in conjunction with the fence, such as for routing coped door-rail ends or dadoes in narrow stock, using the fence as a sto…

  • Quote from the source:

What Is A Combination Square Used For? – Obsessed …

  • Author: www.obsessedwoodworking.com

  • Evaluate 4 ⭐ (28129 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about What Is A Combination Square Used For? – Obsessed … A combo square can be used to measure inside and outside angles, as well as a marking device, a …

  • Match the search results: How do we ensure an angle is square?  Well, the obvious answer is we use a square.  Depending on the project you are working on, you might use one of several squares.  How many types of squares are there?  Here are a few:

  • Quote from the source:

The Multi-talented Combination Square: A Whole Lot Of Tool …

  • Author: www.woodcraft.com

  • Evaluate 4 ⭐ (34937 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about The Multi-talented Combination Square: A Whole Lot Of Tool … A combo square is commonly used as a substitute for a marking gauge when drawing parallel lines. Just set the ruler to the desired distance, …

  • Match the search results: Before relying on any square, first check its precision at 90°. If you have a reference square that you know to be accurate, simply nest it against the square in question, inside-to-outside and then outside-to-inside, holding them up to a strong backlight to ensure that they mate exactly. Alternativ…

  • Quote from the source:

Getting the Most from your Combination Square | Fix.com

  • Author: www.fix.com

  • Evaluate 3 ⭐ (10229 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Getting the Most from your Combination Square | Fix.com In woodworking, the ability to do work faster and more efficiently is often crucial to success. Historically, a bench carpenter would need …

  • Match the search results: In woodworking, the ability to do work faster and more efficiently is often crucial to success.
    Historically, a bench carpenter would need several dedicated tools – try square, marking gauge, miter square,
    level, etc. – to carry out the same jobs a single modern combination square is able to tack…

  • Quote from the source:

What is a Combination Square?

  • Author: www.wise-geek.com

  • Evaluate 3 ⭐ (18139 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about What is a Combination Square? A combination square is a device used in woodworking to help achieve … and precision steel square, but the combination square is the most …

  • Match the search results: A combination square is used in woodworking to help achieve the angles necessary to complete the project. It is typically used for framing houses or in small woodworking projects, such as cabinets and dressers. There are several different types of squares available for woodworking, such as the fra…

  • Quote from the source:

9 Ways to Use a Combination Square (with Pictures) DIY Gear …

  • Author: diygearreviews.com

  • Evaluate 3 ⭐ (9594 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about 9 Ways to Use a Combination Square (with Pictures) DIY Gear … In a woodworking shop, precise measurements, straight lines, and accurate angles can make or break a project. The list of tools a person can …

  • Match the search results: Apart from having different sizes of squares, having many woodworking squares of the same size isn’t a bad idea. Having a square at each workstation can save you from hunting for the tool within your whole shop. 

  • Quote from the source:

Combination Square – Bob Vila

  • Author: www.bobvila.com

  • Evaluate 3 ⭐ (6915 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Combination Square – Bob Vila The purposes vary: The combination square can be used as a try square, to determine the squareness of a piece of joint; like the speed …

  • Match the search results: The purposes vary: The combination square can be used as a try square, to determine the squareness of a piece of joint; like the speed square, it can also be used as a saw guide. When the head is set at the end of the rule, the combination square can measure heights. It can also be adjusted to measu…

  • Quote from the source:

Combination square Definition & Meaning – Merriam-Webster

  • Author: www.merriam-webster.com

  • Evaluate 4 ⭐ (39537 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Combination square Definition & Meaning – Merriam-Webster The meaning of COMBINATION SQUARE is a measuring tool consisting of a steel rule that slides through an adjustable protractor head or level or a center head …

  • Match the search results: “Combination square.” Merriam-Webster.com Dictionary, Merriam-Webster, https://www.merriam-webster.com/dictionary/combination%20square. Accessed 11 Apr. 2022.

  • Quote from the source:

What are the parts of a combination square set? – Wonkee …

  • Author: www.wonkeedonkeetools.co.uk

  • Evaluate 4 ⭐ (22993 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about What are the parts of a combination square set? – Wonkee … The square head is primarily used for measuring right angles (90 degrees) and 45 degree angles, but can also be used for other jobs including the measurement of …

  • Match the search results: The rule (which is sometimes referred to as the “blade”) is the part of the combination square set onto which the square head, centre head and protractor head can be placed.

  • Quote from the source:

Glossary Combination Square – A History of Woodworking

  • Author: www.woodworkinghistory.com

  • Evaluate 4 ⭐ (38902 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Glossary Combination Square – A History of Woodworking Its primary use is first as a measuring tool, but — as its label suggests — it also performs several other functions. The combination square “combines” in one …

  • Match the search results:
    In the woodshop, virtually indispensable, first as a measuring tool, as its label suggests — performs several other functions:

    Try-Square, Marking Square, Ruler,
    Miter Square, depth gauge, height gauge, and plumb.

    (Some Combination Squares include tiny Spirit
    Levels and Scribes or t…

  • Quote from the source:

Twelve Things a Combination Square Can Do – Ron Hazelton

  • Author: www.ronhazelton.com

  • Evaluate 4 ⭐ (28485 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Twelve Things a Combination Square Can Do – Ron Hazelton Whenever I’m setting up or calibrating a power miter saw, table saw, jointer, drill press, even a router this is the tool I most often use. This …

  • Match the search results: Much More Than Just a Square
    While the  most common use for the instrument is probably laying out square ends and edges on boards, this is just the tip of the iceberg when it comes to its capabilities. Whenever I’m setting up or calibrating a power miter saw, table saw, jointer,…

  • Quote from the source:

Skill Builder: Using a Combination Square – Make Magazine

  • Author: makezine.com

  • Evaluate 3 ⭐ (19811 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Skill Builder: Using a Combination Square – Make Magazine Several years we did a popular skill builder on the speed square, a triangular measuring tool created for roofing carpenters that has been …

  • Match the search results: But what if the square ain’t square? Cheap combo squares are often not true (or don’t remain so). In this video, John Heisz shows you how to test your square for square and how to adjust it to make it true:

  • Quote from the source:

Best Combination Square – Why You Definitely Need One …

  • Author: www.manmadediy.com

  • Evaluate 3 ⭐ (11687 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Best Combination Square – Why You Definitely Need One … The best combination square will quickly become essential in your shop. … So does that mean that the layout and setup process is twice as …

  • Match the search results: So, again, the plan of attack here is: invest in the best 12″ square you can afford, and take care of it. Supplement that with a nice-quality 4″ double square for try-square tasks and measuring of small parts (just having a fine ruler is amazing, too). Then, add a “good enough&rdqu…

  • Quote from the source:

Combination Squares | Empire Level – Built On Trust

  • Author: www.empirelevel.com

  • Evaluate 4 ⭐ (32360 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Combination Squares | Empire Level – Built On Trust SQUARE UP WITH BLADE-LOCK™. Combination squares are an essential measuring tool for any workshop, metalworking, or construction jobsite.

  • Match the search results:
    Combination squares are an essential measuring tool for any workshop, metalworking, or construction jobsite. Whether you are measuring angles, gauging depth, or finding the center on rounded objects, or checking level, EMPIRE® is committed to delivering the most refined, accurate, and easy-to-…

  • Quote from the source:

The Best Combination Squares for Your Garage or Workshop

  • Author: www.popularmechanics.com

  • Evaluate 4 ⭐ (31976 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about The Best Combination Squares for Your Garage or Workshop When considering which combination square to choose, you should first … are square and using the ruler for measurements, then you can …

  • Match the search results: If you need to check, measure, or create a range of angle measurements, this comprehensive set could be just what you’re looking for. It features center, square, and protractor heads, allowing you to use it for a wider variety of projects than a typical combination square. Its square head incl…

  • Quote from the source:

Using a Combination Square for Measurements – Rockler

  • Author: www.rockler.com

  • Evaluate 3 ⭐ (16796 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Using a Combination Square for Measurements – Rockler This is the combination square a carpenter uses. Every tradesperson has one, too. And DIYers gravitate to such squares, as do many …

  • Match the search results: In short order, I got a second Starrett, a new one with a 12″ blade. It was an admission that a 24″ blade is really too long for most work. Some time later, conceding that even the 12″ blade is too long for close work, I got a 4″ square, all top-drawer and a bit pricey. But wait a minute here. Let’s…

  • Quote from the source:

Handyman Combination Square – STANLEY® Tools

  • Author: www.stanleytools.com

  • Evaluate 4 ⭐ (30535 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Handyman Combination Square – STANLEY® Tools But do not confuse this square with the better one. The better one has a cast iron stock and a brass locking nut. Where did you purchase the product? In …

  • Match the search results: The 12″ combination square is durable and accurate. Its blade is made of hard chrome, which is coated to resist rust for long life. With built-in scriber for surface marking, easy-to-read vial, and die-cast metal handle, this tool allows for efficient measuring and marking.

  • Quote from the source:

Best combination squares reviewed | Top 6 for precise …

  • Author: toolsdoctor.com

  • Evaluate 4 ⭐ (35725 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Best combination squares reviewed | Top 6 for precise … Best combination square for … is the ideal combination …

  • Match the search results: The Swanson Speed Square (that I’ve also reviewed here) can be used as a try square, miter square, saw guide, line scriber, and protractor square.

  • Quote from the source:

Choosing and Using Squares – This Old House

  • Author: www.thisoldhouse.com

  • Evaluate 4 ⭐ (39682 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Choosing and Using Squares – This Old House Most provide a fixed 90-degree angle in various forms, and some can help copy or draw other angles. “The first square you buy should be a 12-inch speed square,” …

  • Match the search results: Use a 12-inch speed square to guide your circular saw when crosscutting. With the saw switched off, position it on the layout line, then slide the square up to the saw shoe. Tom holds the square in position with one hand, but if that’s not comfortable, you can clamp the square in place to free up bo…

  • Quote from the source:

  • Author: www.popularwoodworking.com

  • Evaluate 4 ⭐ (23820 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Combination Squares | Popular Woodworking If you only splurge on one tool in you life, get a Starrett square. You’ll be glad you did every time you pick it up, and your children and …

  • Match the search results: Parts of the square itself can be used to mark common dimensions. The rule on the 6″ Starrett combination square is 1⁄16” thick and 3⁄4” wide. On the 12″ square, the blade is 1″ wide.

  • Quote from the source:

Multi-read content what does a combination square do

If I could only have one wood layout and measuring tool, other than a tape measure, it would be a 12 inch combo square. It is without a doubt the most flexible layout engine I own. A squared velocity occurs for an adjacent second. Some uses of the combined square are not immediately obvious.

Contents

  • Buy a quality combo square
  • Size problem
  • When counting accurately, write the line, don’t draw it
  • Use one square to make three squares
  • Use a combination square as a ruler
  • Use a combined square as a measurement marker
  • Using the Combination Square as a Depth Gauge
  • Using the combination square on the altimeter
  • Use a combination square as a ruler
  • Finding centers on round objects
  • Protractor tip
  • Inference

Buy a quality combo square

When buying a combo square, you will think of a name:Starret. They invented this tool and are known for making the best quality combo squares. It works the smoothest and most precise you can buy. The price is the only downside. At over $100 for the 12-inch model, the Starrett Combo Square is ten times more expensive than some of their competition. I think the quality comes with the price.

A more reasonable option would beiGagingorwood carvers. I own both, and they are extremely accurate. Although they don’t work properly, each costs half of what you would pay for a Starrett.

For those who are budget conscious, I recommendEmpireorIrwin. These amazing tools will last you for years. When you compare the budget models with the mid-range combo squares, it’s clear that they are not in the same class. IGaging and Woodriver have much thicker hardened steel blades.

Size problem

As I mentioned, if I could only have one square suit it would be the 12 inch model. However, 75% of the time I use my 6 inch square model. I keep my 6 inch square in the pocket of my shop apron. The combined square is actually up to 24 inches. For this size I will stick with oneStarrett 24 inch. For every 1 inch of length you add to a square, any amount the square falls outside of 90 degrees is multiplied. I have already written an article onhow to check the correctness of bubbles and squares.

6 Inch vs 12 InchSquare combo 12″ vs 6″

When counting accurately, write the line, don’t draw it

No matter how sharp your pencil tip is, you won’t get the sharp line you want by scribbling with amarker knifeor punch. Almost all combination squares have built-in notes.

I have foil three-line squares, but I don’t like using a line cutter. If I tilt the knife the wrong way, I can cut a square. The stainless steel of the combined square cutting blades guarantees no wear on the cutting edge.

Scribing a lineDraw a line with a marker and a combined square

Use one square to make three squares

Three squares are some of the earliest forms oflaying out and measuring tools for woodworking. The Egyptians and Romans used them. A combination square in its simplest form is an adjustable three-dimensional square with the tip moving up and down the length of the blade. Combination squares can measure both 90 degrees and 45 degrees, which most traditional three-dimensional squares cannot.

When using a compound square for a 90 or 45 degree layout, make sure the anvil is pressed firmly against the wood. The anvil is the part of the square head that contacts the wood at a 90 degree angle. The shoulder is the part that is in contact at a 45 degree angle. When using a square, make sure there is no dust stuck between the anvil and the wood.

Hold your pencil or marker at a steady angle as you mark your line. Any change in the angle at which you hold the pencil will make the line square.

Use a combination square as a ruler

A hook ruler is a ruler with a small 90 protrusion that allows you to hook it over the edge of the board. It’s faster and more accurate than trying to hold 0″ by hand on the edge of the board. A combo square will do the same thing if you place the drive 2″ on the ruler. You can then hook the point to the edge of the board to take your measurement. Remember to offset the ruler from 2″ instead of 0″ like a real hook.

Use a combined square as a measurement marker

Instead of setting your measurement to 2″, I usually set it to whatever measurement I need from the bottom of the ruler. Once placed on the board, it will end up being where you mark your reference. This is particularly useful during a production run of the same component and all boards requiring the same measurements.

If you need to draw a line parallel to the edge of the board, set your combined square to exactly the same measurement as if you were using it as a crochet ruler. Then place the pencil on the tip of the ruler and slide the entire combined square along the length of the board. Keep your pencil inscribed on the tip of the tongue while moving the square. That’s what the marker ruler does, except you don’t have to hold a pencil or marker knife.

Marking GaugeUse the combined square as a measurement marker

Using the Combination Square as a Depth Gauge

A depth gauge extends across a hole, channel or recess and allows you to measure down to its bottom. A combo square can do the same thing if you place the anvil against your surface. Next, loosen the blade so it slides down the hole, then retighten the adjustment knob. The measurement at the anvil is the depth of the hole. The dedicated depth gauge has a slimmer drop-down list for taking measurements, so it accommodates smaller holes.

Depth GaugeUsing the combined square as a measure of depth

Using the combined square on the altimeter

Position the anvil so that it is aligned with the 0″ and place the anvil on a table saw or router with the blade up and not perpendicular to the table top. Align the ruler so let it just touch your saw blade or router and you have a convenient way to measure blade height.

Some woodworkers prefer to put the measurements they need on the combined square instead of 0″. Hold the end of the ruler on the table and lift your tongue or bite down until it touches the anvil. gives height, but you need to make sure the end of the ruler is completely flat against the table top or router base I don’t like this method It’s too easy to introduce a small angle on the ruler that will compromise your measurements.

Height GaugeAdjust the height of the table saw blade

Use a combination square as a ruler

The combination block can be disassembled by loosening the crown and sliding the tip out of the blade. This allows you to use the blade as a standalone ruler. give it allgetting back together is a real pain, so I don’t want to part ways unless I have to. The rules are not expensive so I prefer to have my own.

Finding centers on round objects

If you buy your combination square as a set, you can get a square with a 90/45 degree offset square. This is the v-shaped attachment that slides over the ruler once you remove the 90/45 degree tip. This attachment goes against the end of the round object. Mark a line at the end of your circular object. Now rotate the compound square 90 degrees and draw a new line. The intersection of the two lines will be the exact center of the circular object. This is useful for marking the center of the pin when you need to install a screw on the end.

Center Finding Head of a combination SquareThe head seeks the center of a matching square

Protractor tip

When you purchase a four-piece combo square, it includes a protractor tip. This trick allows you to change the angle of the blade as you see fit instead of just 90 or 45 degrees. My job haslarge number offrom its corners. I find the protractor tip very useful. I bought a second set of combo squares so I could leave the protractor tip on the second one. If I owned a lathe I would buy a third set to have a dedicated center sight.

Combination Square Protractor HeadUsing the protractor tip of a compound square on one of my sculptures

Inference

Combination squares are extremely versatile. I can’t imagine being a carpenter or even a metalworker without one…or in my case six. You should definitely choose a cheaper model to start with. Once you realize how much you can use this tool, you might want to upgrade to a nicer sequel.

Your information will *never* be shared or sold to third parties.

Popular questions about what does a combination square do

what does a combination square do?

A combination square is a multi-purpose measuring and marking tool used in metalworking, woodworking, and stonemasonry. It is composed of a rule and one or more interchangeable heads that can be attached to the rule.

What would you use a combination square for?

A combination square is a multi-use measuring instrument which is primarily used for ensuring the integrity of a 90° angle, measuring a 45° angle, measuring the center of a circular object, find depth, and simple distance measurements. It can also be used to determine level and plumb using its spirit level vial.

Why do woodworkers use a combination square?

A combo square can be used to measure inside and outside angles, as well as a marking device, a miter square, a try square, a plumb, and the rule, can be used as a straight edge. It can measure length and depth, check square and 45 degree angles, and its simple bubble level can indicate plumb and level.

What is the purpose of a tri square?

A try square or try-square is a woodworking tool used for marking and checking 90° angles on pieces of wood. Though woodworkers use many different types of square, the try square is considered one of the essential tools for woodworking.

What is a combination square used for in welding?

How do we use combination square in agriculture?

How do you square a combination square?

What is sliding T level?

A sliding T bevel, also known as a bevel gauge or false square is an adjustable gauge for setting and transferring angles. Different from the square, which is fixed and can only set a 90° angle, the sliding T bevel can set any angle and transfer it on another piece.

Are combination squares accurate?

While the 4R marking system is popular on precision combination tools, many DIY users don’t need the ability to measure and mark to 1/64-inch accuracy. With scales of 1/8 inch and 1/16 inch on one side and 1 millimeter on the other, the easy-to-read TICOFTECH blade is adequate for most home woodworkers or DIYers.

What kind of square do I need for woodworking?

engineer’s combination square
Depending on the woodworking craft, most woodworkers engaged in general woodworking and furniture making use a square known as an engineer’s combination square.

What tool cuts curves in wood?

Circular saw technique

The first tool that comes to mind for cutting curves is a jigsaw, but if the curve is gradual, try a circular saw instead. It’s surprisingly quick and easy to cut a smooth curve with a circular saw. This method is for cutting rough curves.

What is a sliding T bevel used for?

A sliding T-bevel is an instrument that is used for both laying out and transferring angles. These tools are pivotal for many different kinds of construction jobs, especially for those in which the ideal 90° angles are not possible.

What does a jig do?

a jig is a type of tool used to control the location and/or motion of another tool. A jig’s primary purpose is to provide repeatability, accuracy, and interchangeability in the manufacturing of products. A device that does both functions (holding the work and guiding a tool) is called a jig.

Which head should be used on a combination square to check right angles?

The protractor head can be used for: Measuring and checking angles between surfaces, edges, and markings.

What are the 3 names of the heads on a combination square?

The rule (which is sometimes referred to as the “blade”) is the part of the combination square set onto which the square head, centre head and protractor head can be placed.

Video tutorials about what does a combination square do

keywords: #stumpynubs, #starrett, #igaging, #combinationsquare

CLICK “SHOW MORE” BELOW FOR LINKS u0026 NOTES►

SUBSCRIBE (FREE) TO STUMPY NUBS WOODWORKING JOURNAL►

-http://www.stumpynubs.com

SUBSCRIBE TO OUR YOUTUBE CHANNEL►

-https://www.youtube.com/user/StumpyNubsWorkshop

LINKS TO TOOLS SEEN IN VIDEO (clicking on these links helps support us, at no cost to you)►

iGaging combination squares (high quality, moderate price):

-http://www.chipsfly.com/category/RS.html

Starrett combination squares (highest quality, high price):

-http://amzn.to/2sC1DLU

Follow us on social media►

Instagram:

-https://www.instagram.com/stumpynubs/

Twitter:

-https://twitter.com/StumpyNubs

Facebook:

-https://www.facebook.com/Stumpy-Nubs-Woodworking-Journal-305639859477973/

HELP KEEP OUR VIDEOS FREE! Please support those who support us by visiting their websites and having a quick look around-

MyWoodCutters:

-https://mywoodcutters.com/

Bora/Portamate:

-http://www.affinitytool.com/

iGaging Tools:

-http://chipsfly.com/

keywords: #combinationsquare, #combinationsquareuses, #usingacombinationsquare, #combinationsquarevsspeedsquare, #bestcombinationsquare, #adjustablesquare, #bahcocombinationsquare, #combinationsquaretips, #combinationsquarecrashcourse, #howtousecombinationsquare, #howtouseacombinationsquare, #bahcocs400, #cobinationsquare, #swansonspeedsquarebook, #bahcocs300, #swansoncombinationsquare, #beautyandthebolt, #empirecombinationsquare, #combinationsquaretricks

We’re so sorry you had to listen to Xyla’s not-even-attempted-to-sing Jaws themesong. We’ll make it up to you someday.

The combination square is a super versatile tool that can make your life a billion times easier when you need to measure and mark things, from the woodshop to your everyday life. It has a ruler and a standard square head which helps you with 90° and 45° angles. Learn about the basic uses of the combination square in this crash course!

The combination square is a very common tool, and you can find it in most hardware stores near you. When you’re shopping for a combination square, be sure to get one that’s etched (not printed) so the numbers won’t rub off over time.

👩🏻‍🔧👩🏽‍🔧👩🏿‍🔧BE OUR INTERNET FRIENDS:👩🏻‍🏭👩🏽‍🏭👩🏿‍🏭

👗 Merch:

-https://www.beautyandthebolt.com/buy-merchandise

💸 Patreon:

-https://www.patreon.com/beautyandthebolt

📸 Instagram:

-https://www.instagram.com/beautyandthebolt/

🐦 Twitter:

-https://twitter.com/BeautyandBolt

📚 Facebook:

-https://www.facebook.com/beautyandthebolt

HEY HEY BY THE WAY Beauty and the Bolt is a 501c3 nonprofit organization devoted to reducing the barrier to entry for girls and minorities in engineering, technology, and making. Check out our website for teacher resources, educator tool reviews, and additional services.

👩🏻‍🔬👩🏼‍✈️beautyandthebolt.com 👩🏾‍🚀👷🏿‍♀️

🛒 Additionally, make sure to select “Beauty and the Bolt” as your charity on smile.amazon.com!

🛠️🔬📐 TOOLS AND MATERIALS 🔩🗜️🔧

🧰 Our General Amazon Storefront:

-https://www.amazon.com/shop/beautyandthebolt

(this has lists of Xyla’s all-time favorites!)

Empire Combination Square:

-https://amzn.to/2Srfhuv

Irwin Combination Square:

-https://amzn.to/32Dom8u

Carpenters Pencil:

-https://amzn.to/2O1sP1m

🎶 Music: 🎶

🔔Our theme music is written just for us by the incredible Alexander Parrish!

For more information on Alexander or to book a commission/gig:

-http://alexanderparrish.com/

keywords: #combination, #basics, #fast, #easy, #use, #wood, #metal, #blue, #help, #tool

Not all the ways this tool can be used, but good tips, and ways to make it work for you.

keywords: #combinationsquare, #woodworking, #square, #tools, #diy, #howto, #how-to, #woodworkingtools, #easy, #tool, #wood, #tips, #doityourself, #measuring, #basics, #beginner, #carpentry, #tricks, #handtools, #workshop, #project, #combination, #woodwork, #marking, #shop, #make, #woodworking, #traininghandsacademy, #combinationsquaresethowtouse, #combinationsquareadjustment, #combinationsquarehowtouse, #combinationsquarebasics, #combinationsquarescribe, #woodworkingbeginners, #measuringandmarkingtoolsforwoodworking

The combination square is one of my favorite measuring and marking tools. Today we will talk briefly about what the combination square is, then we’ll cover seven of its’ main uses. If you have questions or would like to share photos of your work with me, email them to [email protected]

Amazon Affiliate Links to Tools I Like and Use (THANK YOU for supporting THA!)

HAND TOOLS:

Combination Square:

-https://amzn.to/2X79Cgb

Kreg Jig:

-https://amzn.to/2KLPvxY

Speed Square:

-https://amzn.to/31fv02z

End Cutting Pliers (they don’t sell mine anymore):

-https://amzn.to/31hq1yt

Estwing Hammer:

-https://amzn.to/2VVnHMr

Chisel Set:

-https://amzn.to/2BjHH1H

Nail Set:

-https://amzn.to/2BdxCU4

Pry Bar Scraper (better then mine):

-https://amzn.to/2oGhKXu

Tape Measure:

-https://amzn.to/32gdEUt

15-Inch Utility Pry Bar:

-https://amzn.to/2IPlHQs

Level Set:

-https://amzn.to/33C56rD

POWER TOOLS:

Drill Combo Set:

-https://amzn.to/2nDsqFV

Jigsaw:

-https://amzn.to/2AGpGua

Porter Cable Belt Sander:

-https://amzn.to/38D3kJe

Circular Saw:

-https://amzn.to/2Pvto2C

D-Handle Router:

-https://amzn.to/2ol4mYx

Small Router:

-https://amzn.to/2nEjDUe

Plunge Router:

-https://amzn.to/2LK29yQ

—————————————————-

Follow me on:

INSTAGRAM:

-https://www.instagram.com/traininghandsacademy/

FACEBOOK :

-https://www.facebook.com/traininghandsacademy/

My name is Josh Fedorka, and I’m the founder of Training Hands Academy™. I have been a carpenter and woodworker for over 25 years. I have also held certifications in home energy auditing and have built several LEED certified homes in New England.

God has gifted me with many “hands on” skills and it is my calling and purpose to share those skills by teaching others. Whether it is to seek a career in carpentry, become a general contractor or improve one’s DIY skills and knowledge, the motivation behind THA is to help others successfully learn how to work with their hands.

#beginner #combinationsquare #woodworking

See more articles in category: FAQS