Top 10 how to unscrew bathroom faucet

Below is the best information and knowledge about how to unscrew bathroom faucet compiled and compiled by the team, along with other related topics such as:: how to remove widespread bathroom faucet, how to remove faucet, faucet removal tool, how to remove a two handle bathroom faucet, remove 3 piece delta bathroom faucet, how to remove kitchen faucet nut, bathroom faucet removal problems, how to remove bathroom faucet handle.

how to unscrew bathroom faucet

Image for keyword: how to unscrew bathroom faucet

The most popular articles about how to unscrew bathroom faucet

The Pro Way to Replace a Bathroom Faucet DIY – 760-594-1226

  • Author:

  • Evaluate 4 ⭐ (39072 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about The Pro Way to Replace a Bathroom Faucet DIY – 760-594-1226 Remove nuts, bolts and hoses from the old faucet · Turn the water supply line nuts counter clockwise until they come out. · After removing the old components and …

  • Match the search results: When I come to help, you get a bonus hands-on lesson in how to replace a faucet like a plumber. Then if you want to replace another faucet, another bathroom’s faucet faucet for example, you’ll be able to do it like a pro. (Or to know you don’t want to tackle it yourself.)

  • Quote from the source:

How to Remove a Bathroom Faucet and Pop-Up Drain

  • Author:

  • Evaluate 4 ⭐ (33545 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Remove a Bathroom Faucet and Pop-Up Drain How to Remove a Bathroom Faucet and Pop-Up Drain · 1. Under the sink, loosen the nut holding the top of the strap to the lift rod. · 2. Use the adjustable wrench …

  • Match the search results: You might’ve heard that the hardest part of putting in a new faucet is getting the old one out, but that’s only true because today’s faucets install so easily! Removing an old faucet (and a pop-up drain assembly, too!) only takes a few minutes and a little elbow grease. Here’s how.

  • Quote from the source:

How to Remove Bathroom Sink Faucet Handle That has No …

  • Author:

  • Evaluate 4 ⭐ (32354 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Remove Bathroom Sink Faucet Handle That has No … How to Remove a Bathroom Faucet Handle that Have No Screws: · Step 1: Locate the Cap or Button · Step 2: Use a Flat Screwdriver to Pop Out the Button or Cap · Step …

  • Match the search results: When the screw comes out, pull out the faucet's handle. If you can't have it out with your plain hands, try using a pair of pliers or faucet handle puller. Pliers can scratch your faucet's handle if applied directly. Wrap an old cloth or towel around the handle's base then use the pl…

  • Quote from the source:

How to Replace a Bathroom Faucet – wikiHow

  • Author:

  • Evaluate 3 ⭐ (12793 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Replace a Bathroom Faucet – wikiHow Loosen the lock nuts to take out the old faucet. Most faucets are attached to the sink by locknuts attached to the …

  • Match the search results: Before replacing a bathroom faucet, turn off the water supply using the valve behind the sink, and drain the pipes beneath the basin. Next, disconnect the supply tubes beneath the basin, and use a wrench to remove the bolts holding the old faucet in place. Then, remove the old faucet, insert the new…

  • Quote from the source:

Removing an Old Bathroom Faucet – Snap Goods

  • Author:

  • Evaluate 3 ⭐ (7649 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Removing an Old Bathroom Faucet – Snap Goods Removing the Old Faucet From the Counter … Use a sharp knife, such as a utility knife, to cut any caulk at the base of the old bathroom faucet. Take care not to …

  • Match the search results: Some old bathroom faucets may be connected to the drain stopper in the sink below. This needs to be disconnected before you can remove the old bathroom faucet. Underneath the sink, there will be a vertical rod leading from the faucet above connected to a horizontal rod running to the drain pipe. Whe…

  • Quote from the source:

How To Remove Single Handle Bathroom Faucet

  • Author:

  • Evaluate 4 ⭐ (39335 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How To Remove Single Handle Bathroom Faucet Is it easy to change bathroom taps? How do I remove a hidden aerator without a key? Do all faucet aerators come off? Removing a Single-Lever Faucet …

  • Match the search results: Removing a Single-Lever Faucet Step 1: Turn off Main Water Valve. Before even starting to remove the single lever faucet, make sure you turn off the main valve of your water. Step 2: Detach the Handle. Step 3: Remove the Valve Screw. Step 4: Undo the Faucet Screws. Step 5: Remove the Metal Ring. St…

  • Quote from the source:

How Faucets Work — Diagrams & Disassembly – HomeTips

  • Author:

  • Evaluate 4 ⭐ (23046 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How Faucets Work — Diagrams & Disassembly – HomeTips Unscrew the bonnet from the faucet base, using slip-joint pliers. Then remove the valve stem; this has reverse threads, so unscrew it by turning …

  • Match the search results: Ceramic disc faucets were first made popular by high-end European faucet makers and now produced by American Standard, Kohler, Price Pfister, and many other American faucet manufacturers.

  • Quote from the source:

Bathroom – Uninstall Faucet or Removing Quick Connector

  • Author:

  • Evaluate 3 ⭐ (16840 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Bathroom – Uninstall Faucet or Removing Quick Connector To remove the Y shaped connector from the spout, press up slightly on the entire piece (up towards the bottom of the counter) and then pull down on the colored …

  • Match the search results: 1-800-PFAUCET(1-800-732-8238)

  • Quote from the source:

How to Remove a Bath Faucet – DIY – PJ Fitzpatrick

  • Author:

  • Evaluate 3 ⭐ (1241 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Remove a Bath Faucet – DIY – PJ Fitzpatrick Removing your faucet is a simple job that only requires a few tools and a little bit of time. Here, our bath experts explain how to do it.

  • Match the search results: Whether you’re in need of a new bathroom faucet or you simply want to update the look of your bathroom, removing your faucet is a simple job that only requires a few tools and a little bit of time. Here, our bath experts explain how to do it:

  • Quote from the source:

How to Replace a Bathroom Faucet | Wayfair

  • Author:

  • Evaluate 4 ⭐ (21232 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Replace a Bathroom Faucet | Wayfair Step 5: Disconnect and remove the pop-up drain assembly, if necessary. Many faucets come with a matching drain assembly, but you can skip this step if you’re …

  • Match the search results: Step 4: Center the faucet and attach it to the sink. Thread the faucet plate or bracket (if applicable), gaskets, and mounting nut(s) that came with your new faucet up onto the bottom of the faucet via the faucet’s supply lines. Making sure the faucet is centered, hand-tighten the nuts to loosely se…

  • Quote from the source:

Multi-read content how to unscrew bathroom faucet

Want to learn how to change the bathroom faucet?

Maybe the previous owner had bad taste?

Or the current faucet just isn’t your style?

You can easily do this project BUT you will need the right tools and guidance.

Hey, that’s where I come in!!

I show you three tools that make it easier to swap faucets.

I’m giving away one of my favorites, so don’t miss out

A few years ago I was trying to disassemble a faucet in a rental that I saw vibrate.

Don’t forget that I am a beginner in DIY.

After 3 hours of blood, sweat and a few curses starting with the letter “S”, I finally managed to get the faucet out of the sink.

It should have taken me 10 minutes.

It’s a waste of time.

I don’t want you to make the same mistakes.

You will have a much happier experience after reading and watching my secret tips.

Here is the list of supplies for today’s bathroom faucet project

  • basin key
  • ($16) or
  • Ridgid Faucet and Faucet Installation Tool
  • ($20)
  • Adjustable Wrench Set ($19 or FREE)
  • Chain lock
  • ($12 or FREE)
  • WD-40
  • ($4)
  • New Faucet ($50 – $300)
  • Plumber
  • ($4)
  • Plastic box for P-Trap (FREE)
  • Towel or cloth (FREE)
  • Sponge with scouring pad ($1)
  • Tape measure (FREE or to borrow)

Let’s dive into this tutorial

How to remove the bathroom faucet without being cursed

I’ve had my share of curses.

Especially when it comes to plumbing, but you can easily avoid this beloved American pastime.

The first step is to put the shutoff valves in the closed position by turning them clockwise until they stop.

Turn off water

This prevents water from entering your faucet.

If for some reason your shutoff valve is not working, you will need to turn off the water at the main water valve.

Water main valves are usually located in basements or utility rooms.

Place your plastic container under the P-Trap.

Next, remove the slip nut that secures the P-trap to your wall’s drain and pipe.

Remove P-Trap

Turn the slip nut counterclockwise by hand or with the channel lock.

When you loosen the nut connecting the P-Trap to the gooseneck from the wall, you should see water coming out of the pipes.


The water in the P-Trap prevents air from escaping into the bathroom through your sink.

Also note, if your bathroom has that sewage smell, it could be due to

  1. A P-trap. Dry sink
  2. P-trap. Bath or dry shower
  3. Your toilet needs a new wax ring

Water can be good or bad.

When it comes to stopping gas from leaking out, water is your best friend!


Get a sink key or a Ridgid faucet

Reach under the sink, attach the sink or Ridgid tool to the power wire nuts and turn the tool clockwise.

Do this for the hot and cold water supply lines.

Remove faucet supply line

This will loosen the nuts and allow you to remove the power cords from the faucet.

Use the same tool to loosen the plastic straps that hold the faucet to the sink.

Remove faucet nuts

Alternatively, if you get stuck, you can spray those nuts with WD-40 and come back in 15 minutes to try the process again.

It’s amazing what WD-40 can do to loosen stuck objects.

After removing the faucet nuts, you can remove the old faucet from the sink.

Using these tools will absolutely save you tons of time and prevent your knuckles from bleeding.

(IMHO) it’s nearly impossible to use a standard wrench to remove a bathroom faucet.

A sink key or a Ridgid Vòi faucet

The next step is to remove it to drain the old water.



Remove the clip that secures the pivot bar to the bone buckle strap.

Slide the door lock wire out of the shaft, then spin the exhaust clockwise with the channel locks.

Don’t worry, I show you how to do it all in a video tutorial

You should then be able to remove the top of the sink drain.

Your drain will probably be very gross.

Wipe it down with a cloth and water or in my case I used Clorox wipes.

Also clean the old faucet area.

You are now ready to replace your old faucet with a shiny new faucet!

Install Your New Bathroom Faucet: Steal These Tricks To Make Your Life Easier

First of all.

Make sure you have the correct size faucet.

Measure the distance between the sink holes.

Measure sink holes

If you only had one hole, your life would be easy, haha.

In this example, the holes are spaced 4 inches apart.

Buy a new faucet that matches this size.

Which faucet brand should you consider?

These are my recommendations

  1. Delta
  2. Moen
  3. Kohler
  4. American standard


They work, install simply, and give you FREE replacement parts.

I especially like the free spare parts.

Let me share why I really love Delta.

They replaced our oil-rubbed brass faucet handle for free.

The handle is chipped at the bottom due to hard water deposits.

Each controller costs $50, but Delta sent them for free.


Watch my video for a full step by step on how to change a bathroom faucet.

The first 5 minutes showed you how to remove the old faucet and at 5:30 I started the process of installing the faucet.

This week’s video is a bit long but I want to make sure you get a thorough explanation.

And after?

If you want to change water lines easily, check out Fluidmaster’sClick seal connector, They are so awesome.

If you are renovating your bathroom and need help,take one of our online courses- they will make your bathroom renovation so much easier!

Let me know if you have any questions and I’ll do my best to help.

Thanks as always for reading, watching and being part of our amazing community.


I f

Replace the bathroom faucet

  1. Celene R says:

    January 16, 2015 at 11:09 am

    Thank you! My mother needed to change some faucets in her house and couldn’t find anyone willing to do such a small job without charging a premium. I’ll be the only one doing this while my boys are on spring break, so this guide won’t come at a more convenient time. Thanks again.
    I can definitely use the tool too!

    To respond

  2. Jeff Patterson says:

    January 16, 2015 at 7:15 p.m.

    Glad you enjoyed Celene’s video.
    Your projects will definitely go much smoother with the Ridgid tool.
    I tend to hear similar stories from other DIYers about how contractors don’t want to do these small jobs.
    But don’t worry, you will be able to help your mother and quickly order faucet replacements for her.

    To respond

  3. Kelly says:

    January 16, 2015 at 11:28 am

    Jeff, your tutorials are so comprehensive that I can handle these chores.
    How will I use the Rigid Faucet and Sink Installer Tool? I’m going to replace the nasty faucet in my basement bathroom!
    Thanks for another great video!

    To respond

  4. Jeff Patterson says:

    January 16, 2015 at 7:16 p.m.

    Awww, thank you very much Kelly.
    I know the video is long but I want it to be as detailed as possible.
    This way, anyone can change the bathroom faucet without getting frustrated.

    To respond

  5. Heather G says:

    January 16, 2015 at 11:38 am

    Why do I NEED this tool? Well, we just moved into our “new” house (old, but new to us). The 3 bathroom faucets we installed, I don’t even feel like brushing my teeth with the water coming out of them. I bought 3 Delta faucets…yes, I love Delta too for many reasons. My husband replaced my faucet, mainly because I broke the water line trying to clean the dirt from the aerator…water spat everywhere, but that’s another story. I think I know what words you used because I’ve heard similar words. Needless to say the remaining 2 faucets have been sitting in the tub for almost 3 months now. Maybe this tool will install 2 other tools…finally!! Or, if nothing else, if I had these tools, I could install them myself. I tried with a regular key and it didn’t work. Thanks for the advice, help and the chance to win a great product!

    To respond

  6. Jeff Patterson says:

    January 16, 2015 at 7:19 p.m.

    Congratulations Heather on your “new” home!!!
    Starting a new adventure at home is always exciting.
    Yes, I bet we shared some of the same swear words. But that’s what happens sometimes when you do DIY, haha.
    Don’t worry about the faucet in the bathtub. I shared delayed projects.
    You will surely be well served with the Ridgid tool

    To respond

  7. Marylou J says:

    January 16, 2015 at 11:58 am

    When it comes to DIY at home, I’m not the best at the pencil box. Say it. I’m a single woman who has to self-correct, and it seems like I have to learn the hard way. ; O} I’ll be working on it soon, and every little help I can get will be a blessing! Thank you for your videos and tutorials… You are now my “go-to” when I have a DIY project to work on.

    To respond

  8. Jeff Patterson says:

    January 16, 2015 at 7:21 p.m.

    I had a bad day with Marylou but after reading your sweet words it’s going so much better
    Whenever you need to ask a question, do it here or in a private Facebook group.
    I am happy to lend my ears.

    To respond

  9. Sue Passe says:

    January 16, 2015 at 12:51 PM

    I hate messing around. Between gravity working on me and trying to see with bifocals and flashlights, changing faucets is a daunting undertaking. Good tools are really useful, so I would definitely appreciate the good one. Thanks, Jeff for that and all your other instructions. I hate plumbing, but you help me feel like I have a chance!

    To respond

  10. Jeff Patterson says:

    January 16, 2015 at 7:22 p.m.

    You can totally do that plumbing job, Sue.
    One thing I forgot in the video showed a nifty headlight you can wear.
    It really helps with tight, dark projects to bring some light to your head. Sure, it looks kinda funny but hey, it doesn’t matter if it works!!!
    This is a great tooltip

    To respond

  11. Meg says:

    January 16, 2015 at 12:52 PM

    I’m so glad you posted this video. I installed my sink faucet to update the look, but it wobbles and spins everywhere. The right tools are important, I agree. Also, your detailed video will help me make sure I can’t go wrong doing one of these days of work again. Thanks again!

    To respond

  12. Jeff Patterson says:

    January 16, 2015 at 7:24 p.m.

    Looks like one of the nuts is loose Meg.
    If you don’t have a sink key, you can buy one.
    I say this only because the pin wrench should be able to grip all sizes of nuts. Sometimes a newer sink comes with a special tool, and if that tool is missing, it can be a bit difficult to tighten the nuts.
    Let me know if I can help in any way

    To respond

  13. Tim Wallace says:

    January 16, 2015 at 1:23 p.m.

    The faucet in my basement bathroom was loose and badly stained due to hard water deposits left by the previous owner. I thought about trying to take it apart, but with all my other projects, I never even considered what is needed to fix this. Seeing that I could do it quickly, maybe I just moved it to the top of my list. I also want to change my faucet in the kitchen so I can add a faucet with a hand sprayer.

    To respond

  14. Jeff Patterson says:

    January 16, 2015 at 7:33 p.m.

    I completely trust Tim’s World that you can quickly remove old faucets and install new faucets. It may take a little effort to remove the beads from the faucet, but usually a little WD-40 will do.
    If you’re having trouble always knowing, you can email me or add your question to a private Facebook group where lots of people can comment 😀

    To respond

  15. Laura says:

    January 16, 2015 at 2:39 p.m.

    Hi Jeff,
    I have a question after looking at Mel’s photo. There was a pipe burst last week and my house was completely flooded. I ripped up the wet carpet and throw pillows in the living room and both bedrooms, but figured the ceramic tiles in the kitchen, bathroom and laundry room would do… right? not ? Should I remove and replace and/or re-route it? Oh my God! Say no! Thanks for your help!! BTW, the ground below is a concrete slab, if that makes a difference.

    To respond

  16. Jeff Patterson says:

    January 16, 2015 at 7:37 p.m.

    Oh man, so sorry to hear about your flood, Laura.
    Water can be devastating.
    Are your bricks chipping or are they still strong enough, i.e. not loose?
    The interesting thing about brick is that while the brick itself is somewhat water resistant, the grout is definitely not. Water will easily penetrate the grout joint and penetrate the surface of the substrate.
    This is one of the main reasons why all tiled floors in the bathroom or kitchen need a waterproof membrane underneath. Something like Ditra, when installed correctly, will help prevent water spills. But this is a completely different guide

    To respond

    Laura says:

    January 18, 2015 at 2:42 PM

    I just checked and the cells don’t seem loose. I don’t know how they were installed; Whether with a waterproof membrane or simply glued…. Guess I should leave them alone unless they start loosening…? Assuming water seeps into the grout, what’s the worst that can happen? Thanks Jeff!!

    To respond

  17. Lena says:

    January 16, 2015 at 3:13 p.m.

    The right tool makes every job easier and I love this tool! I just signed up for your newsletter and videos and was hoping to learn how to do DIY projects around my house. Changing my faucet definitely seems possible with your great instructions…and I would love to win the RIDGID Faucet and Sink Installer!

    To respond

  18. Jeff Patterson says:

    January 16, 2015 at 7:39 p.m.

    Thanks Lene, with a little patience and the right advice you can do a lot on your own.
    And the best part is that you’ll be much happier with your home.
    Glad you enjoyed the newsletter and tutorial. If you have any questions about the tool, I’d be happy to help.
    Another tool I recommend is a hand drill. This little guy is a must have for those of us who have blockages in the tub or shower.

    To respond

    Laura says:

    January 18, 2015 at 2:49 p.m.

    Hi Jeff,
    Again….is it better to use a hand drill than a chisel product? I’ve never really heard of a hand drill. How do I access brass drain liners with crossbars? Also, what is the size or model number of the Channelocks? Last night I went to the hardware store to buy some and got a wall of sorts. The seller did not know what to recommend. Sorry for so many questions! Laura

    To respond

    Jeff Patterson says:

    January 19, 2015 at 8:55 p.m.

    Removing blockages with a drill is much better than with a chemical because chemicals can corrode your pipes. You can fish through the diagonal rods or in the bathtub overflow pipe. I recommend buying a 12 inch channel lock, they are also known as groove and blade cutters. They will serve you well for many projects.

    To respond

  19. Bob Redoutey says:

    January 16, 2015 at 5:07 p.m.

    Pretty new for your video. Always taking care of the “renovation” for the family, which never seems to end. One of the upcoming projects will be to replace the taps in the main bathroom, of course the double vanity. I don’t know how to do it, really happy to have found the “trick”
    Your videos are the best I’ve seen in a long time!
    Thank you for your efforts.

    To respond

  20. Jeff Patterson says:

    January 16, 2015 at 7:41 p.m.

    Man Bob, you and Marylou absolutely made my day.
    I’m glad you enjoyed these videos because there are many more.
    So you will be buying dinero for double makeup taps! Let me know if you have any questions. I’m happy to help anytime 😀

    To respond

  21. Mike said:

    January 16, 2015 at 9:22 p.m.

    Love, love, love this stuff! I spent money buying one until my next faucet job was done…but I’ve wanted one for years. Great video.

    To respond

  22. Jeff Patterson says:

    January 19, 2015 at 8:40 p.m.

    Thanks Mike, yah this tool is one MacGyver will love. It is very flexible and has a wide range of motion, even for the most demanding situations.

    To respond

  23. Carol Lorraine says:

    January 16, 2015 at 9:24 p.m.

    I need this tool now because I have 2 sinks that need to change the taps. Let me win!

    To respond

  24. Jeff Patterson says:

    January 19, 2015 at 8:40 p.m.


    To respond

  25. Jerry Herman says:

    January 16, 2015 at 11:41 p.m.

    I like this tool because it will do the unscrewing and mounting of the nuts under the faucet.
    I plan to use it when I change the sink faucet in the bathroom. Thanks for the step by step video.

    To respond

  26. Jeff Patterson says:

    January 19, 2015 at 8:41 p.m.

    I’m happy to help Jerry.

    To respond

  27. Sue says:

    January 17, 2015 at 7:40 a.m.

    Thanks, I have a cheap faucet in my house that I want to replace but don’t know how. Now yes!

    To respond

  28. Jeff Patterson says:

    January 19, 2015 at 8:42 p.m.

    You will be better served by getting newer brand faucets than Sue. And when you buy them, be sure to keep the sticker out of the box and place it on your vanity so you can refer to the model number if you need replacement parts.

    To respond

  29. calico says:

    January 17, 2015 at 9:22 am

    I have two faucets in my bathroom that really need to be replaced. I want to try it myself, the plumbers charge too much and I have a fixed income. Thank you very much for all your helpful suggestions.

    To respond

  30. Jeff Patterson says:

    January 19, 2015 at 8:43 p.m.

    Glad to help Calico. I feel your pain when it comes to recruiting. Sometimes we don’t have the money to pay someone. This project is easier with the right tools and knowledge. You can totally do that

    To respond

  31. Adrianne Hurtig says:

    January 17, 2015 at 10:57 a.m.

    A timely article!!! What would I do without you and your help?! Thank you!!

    To respond

  32. Jeff Patterson says:

    January 19, 2015 at 8:44 p.m.

    I love helping Adrianne. Always know you have a handyman friend

    To respond

  33. Sunil says:

    January 17, 2015 at 3:49 p.m.

    This post is timely. Last spring I replaced all three faucets in my house along with all of the shutoff valves when I replaced them all with 1/4 angle valves. I have a sink wrench from this project and the difficulty I have is removing the rusty screws from the faucets. This spring, I’m planning to change the faucet in one of my rental houses and I can’t wait for the adventure.

    To respond

  34. Jeff Patterson says:

    January 19, 2015 at 8:46 p.m.

    Ahhh, rusty screws and nuts. What pain in the back. Sunil did a great job replacing the plugs with a quarter turn ball valve. These are the best and will serve you well.

    To respond

  35. Pat says:

    January 17, 2015 at 4:53 p.m.

    Hi Jeff, Thanks for the guide!! I had a problem with my kitchen sink and I’m sure the process is exactly the same. It not only leaked at the base of the faucet neck, but also broke at the bottom. I temporarily stopped the movement using a thick coat of silicone sealant at the sink but I’m sure it won’t last too long. It’s been 2 months now but the faucet definitely needs replacing! I live on a very small monthly income from social security and will have to save a few more months just to buy a new faucet. It would save me a lot if I had the tools to do the job. My bathroom sink faucet still works fine. 🙂

    To respond

  36. Jeff Patterson says:

    January 19, 2015 at 8:50 p.m.

    You’re absolutely right Pat, that faucet won’t last long. Good job trying to keep it still with putty.

    To respond

    Noah’s Law says:

    February 1, 2017 at 1:53 p.m.

    Kitchen sinks work (for the most part) just like bathroom sinks (separate spray attachments work a little differently). It’s likely that your retaining nuts need to be tightened under the sink (this should solve the looseness at the base). However, sometimes it’s because those plastic particles have cracked with age and stress, which won’t work. Often a water leak at the base of the faucet is an easy way to fix the seal. Faucets aren’t cheap, so I’d rather try to repair them as much as possible than replace them.

    To respond

  37. Danny Phillips says:

    January 17, 2015 at 9:52 p.m.

    Jeff, I have 3 sinks and countertops to install. Your instructions were very clear and came exactly as I expected. I could definitely use the sink and faucet installation tool just fine.

    To respond

  38. Jeff Patterson says:

    January 19, 2015 at 8:51 p.m.

    Your hand is full Danny. Glad you enjoyed the tutorial. Keep me posted on your bathroom renovation and if you have any questions

    To respond

  39. Mike Whaley says:

    January 20, 2015 at 00:10

    I bought an older house two years ago and spent a lot of time replacing things and updating other things. I usually do the things that need it the most first and both of my bathroom faucets are on my list so this is a tool I’d love to try and give you my thoughts on it. Your instructions were timely and as far as anyone could tackle this kind of work.
    Thank you and I really enjoy watching these videos

    To respond

  40. rickb says:

    January 20, 2015 at 7:38 p.m.

    I’ve recently been a new fan and love the way you teach and the simple explanations of how to fix! My friend and I are moving to Florida in the next few months and we have LOTS of upgrades and repairs! And this sink replacement guide couldn’t have come at a better time!
    Thanks Jeff!

    To respond

  41. JimB says:

    January 21, 2015 at 8:49 am

    Thanks for that. I have to replace two in one rental unit soon! Perfect time. Could really use a tool to make it easier.

    To respond

  42. Brandon Manuel says:

    January 29, 2015 at 01:42

    Hi Jeff. Your faucet repair ideas and tips will come in handy for all of us, because everyone has a faucet at home.

    To respond

  43. Deanna R. Jones says:

    June 9, 2015 at 6:16 p.m.

    Measuring each hole when changing a bathroom faucet is a very good tip. Like the faucet in the photo, my bathroom faucet also has three sink holes. Are there any particular faucet designs I should keep in mind when choosing a faucet from the store? It seems like knowing the designs to keep in mind when looking for a faucet that fits three pot holes four inches apart would make my life a whole lot easier.

    To respond

  44. Sandra says:

    March 10, 2016 at 8:46 p.m.

    Jeff, I did, replaced my bathroom faucet, and I feel pretty good. Thank you!

    To respond

  45. Jeff Patterson says:

    March 16, 2016 at 05:32

    Amazing Sandra!!!
    Good game

    To respond

  46. Bob M says:

    October 24, 2016 at 9:05 p.m.

    Jeff, I love videos. I’ve binge-watched them since finding a home repair tutor this weekend. There is always a lot of good information in each one. I replaced a faucet on a pedestal sink a few months ago. Metal fittings, rusty and difficult to disassemble. Two things make it easier. The first is to unlock the pot from the wall. This greatly facilitates access to accessories. The second is “Oil Penetration”. After struggling for most of the first day, I sprayed it on the accessories and left it on overnight. The next morning I was able to take them off.

    To respond

  47. John Ferrel says:

    December 8, 2016 at 6:10 p.m.

    I like that you mentioned closing the shutoff valve. When my plumber was fixing my faucets he forgot to turn them off and it flooded my house. I imagine he has been more careful since then.

    To respond

  48. Ken N says:

    April 29, 2017 at 7:27 p.m.

    Hi John,
    I have replaced faucets before and been able to solve the problems that inevitably arise. My issue was that after completing the installation, a small amount of water was standing around the drain pipe in the sink (bathroom). It’s as if the drain pad doesn’t fit far enough into the drain pan (or is too thick). No suggestions? I couldn’t find any help for this on the internet. many thanks

    To respond

  49. Ken N says:

    April 29, 2017 at 7:29 p.m.

    Sorry, I called you John. Thank you JEFF

    To respond

  50. Pingback: Learn how to fix a leaky faucet (Delta bathroom faucet)
  51. Stefan Bradley says:

    June 18, 2019 at 10:54 a.m.

    I’m glad you mentioned that you need to turn off the water at the shutoff valve before changing the faucet to avoid water everywhere. My wife and I had to change the faucet in the bathroom to match the rest of the bathroom, but we had to be careful not to damage our new bathroom. If I can’t change the faucet myself, I’ll find a plumber to change the faucet quickly and efficiently for me.

    To respond

  52. Pingback: How to Choose Bathroom Faucets with Home Gears Blog?
  53. ted said:

    May 4, 2020 at 9:46 a.m.

    So I started replacing the first of three hose replacements and couldn’t get the retaining strap to move on the first. After a long time trying to use every set of pliers I own, I turned to the internet for advice. I found your site and was familiar with something called an adjustable wrench. I was skeptical, but went to my local big box home repair shop. I bought the telescopic model for about $20, still don’t believe it will work and plan to return it. Climbed under the sink, slipped on the nut, and believe it or not it broke the seal instantly and the nut started spinning without issue. Best $20 addition to my tool collection in years, although I think the standard $12 model would be fine as well). Thank you!

    To respond

  54. Karen says:

    June 6, 2020 at 8:14 p.m.

    Hi the video is great and I was about to buy the tool and thought I would check all the parts. My drain with Peerless faucet seems too long – I don’t think the p-trap will reconnect. Is it possible? Should I cut the length of the drain hose? Thanks for any advice.

    To respond

  55. Pingback: 3 small creative tweaks to your Master Suite – Burnett Builders

leave a replyCancel reply

Your email address will not be published. Mandatory fields are marked with *CommentName *
E-mail *
Save my name, email and website in this browser for the next time I comment.


redirect message
Previous How to install the bathtub Next How to wire the light switch

Popular questions about how to unscrew bathroom faucet

how to unscrew bathroom faucet?

How to Remove a Bathroom FaucetDisconnect the hot and cold water supply lines to the faucet.Unscrew the mounting nuts under the sink that secure the faucet. … Disconnect the faucet’s lift rod from the drain.Pull up the old faucet assembly from the top until it clears the sink.

How do you unscrew a tight bathroom faucet?

How do you unscrew a faucet?

How do you loosen a tight bolt on a faucet?

This Old House’s plumbing and heating expert, listed in order from easiest to difficult.
  1. Tighten the nut. Moving the nut in any direction is progress. …
  2. Tap with a hammer. Jarring the nut can break its bond to the bolt. …
  3. Apply heat. Metal expands slightly when hot, which may be enough to crack the nut free. …
  4. Soak the nut.

How do you remove a bathroom faucet handle without screws?

Locate & Remove The Button Or Cap

See if you can locate one on the top or side of the handle. If you find one, you can use a flathead screwdriver to remove it. Simply work it into the gap around the button or cap and work it around the button or cap, gently lifting as you go.

How do you remove a single handle bathroom faucet?

Single-Handle Bathroom Sink Faucets – Handle Removal
  1. Using a bladed screwdriver, gently pry off the plug button under the handle, taking care to protect all finished surfaces.
  2. Using a 1/8″ hex wrench, loosen the setscrew securing the handle to the valve stem.
  3. Lift off the handle.
  4. Unthread the bonnet to expose the valve.

How do you unscrew something tight?

How do you take apart a Kohler bathroom faucet?

How do you remove a Moen bathroom faucet handle?

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.

How do you remove a corroded faucet handle?

Use the hairdryer to heat up the corroded area if it’s still suck. The heat may be able to break or loosen the bonds as the metal swells. Use the wrench again to see if the area has loosened enough to turn. If your faucet is still stuck, let the metal cool down before moving on to the next step.

How do you replace a single bathroom faucet?

Which way do you unscrew?

How do you unscrew something tight without a wrench?

Is it counter clockwise to unscrew?

Typical nuts, screws, bolts, bottle caps, and jar lids are tightened (moved away from the observer) clockwise and loosened (moved towards the observer) counterclockwise in accordance with the right-hand rule.

How do you loosen a Kohler faucet handle?

To remove either handle, explains Kohler, you hold it steady with one hand while you turn this flared piece counterclockwise to unscrew it from its threaded base. The corollary is that, to tighten the handle, you turn this flared piece clockwise until it won’t turn any further.

Video tutorials about how to unscrew bathroom faucet

keywords: #BathroomFaucet, #Bathroom, #Faucet, #Peerless, #Howto, #Uninstall, #removebathroomfaucet, #removefaucet, #bathroomfaucet, #faucetremoval, #howtoremoveabathroomfaucet, #uninstallbathroomfaucet, #diyrepair, #howto

Learn how to remove a bathroom faucet. This video is designed to help you uninstall a bathroom faucet but your specific faucet may not be covered or featured and could be different. Visit


keywords: #faucet, #plumbing, #doityourself, #howto


keywords: #TheHomeDepot, #HomeDepotstores, #Bathroom, #DIY, #bathroomfaucet, #bathroomsinkfaucet, #sinkfaucet, #howtoinstallabathroomfaucet, #howtoinstallafaucet, #installbathroomfaucet, #howtoinstallasinkfaucet, #howtoinstallabathroomsinkfaucet, #installsinkfaucet, #bathroomfaucetconnections, #howtoreplacebathroomfaucet, #replacebathroomfaucet, #howtoreplaceabathroomsinkfaucet, #install, #HomeImprovement

Replacing a bathroom faucet can be simple when you have the know-how. Danny, from The Home Depot, walks through the installation of a new sink faucet in just nine easy steps. Check out the DIY Bathroom Renovation Ideas playlist for more guides:


#TheHomeDepot #HomeImprovement #DIY

SUBSCRIBE to The Home Depot:


Looking for a new bathroom sink faucet? For in-depth reviews, comparisons, and local store inventory, check out the wide selection of options at The Home Depot:


Before installing, check if your bathroom sink supply lines are worn down. New ones can be ordered at The Home Depot or picked up from your local store:


Check out the guide for installing a bathroom faucet on


About The Home Depot:

How doers get more done. We’re helping doers in their home improvement projects. Now you can take on more renovation projects with more know-how. Our step-by-step instructional DIY videos and expert advice will give you the confidence for your next project with hands-on learning. It’s a good time to be a doer.

Follow The Home Depot:











How to Install or Replace a Bathroom Sink Faucet | The Home Depot


See more articles in category: FAQS