Top 8 how to cover chain link fence with wood

Below is the best information and knowledge about how to cover chain link fence with wood compiled and compiled by the team, along with other related topics such as:: inexpensive ways to cover a chain link fence, cost to replace chain link fence with wood, best privacy screen for chain link fence, chain link fence makeover, chain link fence wood adapter, how to make a chain link fence look nice, how to cover chain link fence posts, convert 4 foot chain link fence to 6 foot.

how to cover chain link fence with wood

Image for keyword: how to cover chain link fence with wood

The most popular articles about how to cover chain link fence with wood

  • Author:

  • Evaluate 3 ⭐ (13423 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Build A Wood Fence On A Chainlink Fence – Bower … At first we were going to build all the panels to cover the fence so we priced everything out in the lumber department. As we were figuring out …

  • Match the search results: Chainlink fences everywhere are going to be rattled after this post!  Today is the day where we share how we transformed our chainlink fence into a wood fence with wood panels!  It’s one of the easiest and most effective fence DIY’s and I am SOOOO happy with the end result!

  • Quote from the source:

  • Author:

  • Evaluate 4 ⭐ (30735 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Genius! The Easy Way to Add Privacy to a Chain-Link Fence STEP 4. With the panel complete, all it took were a couple of pipe straps fastened to the wood to hang the project from the metal fence lip.

  • Match the search results: With the panel complete, all it took were a couple of pipe straps fastened to the wood to hang the project from the metal fence lip.

  • Quote from the source:

  • Author:

  • Evaluate 4 ⭐ (34692 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Convert a Chainlink Fence to a Wood Fence Add height to steel fence posts when converting chainlink fence to a wood fence. Using new 6′ end posts, cover the middle line posts like a …

  • Match the search results: As long as your steel posts are solidly in the ground, you should be able to convert your chainlink fence to a wood fence pretty easily. I had two additional issues I needed to deal with. One: my chainlink fence was set up with the posts spaced 8’9″ apart instead of the standard 8′…

  • Quote from the source:

  • Author:

  • Evaluate 4 ⭐ (37204 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Cover a Chain-Link Fence and Give Yourself Privacy Rolled bamboo fencing is constructed from attached poles ranging in thickness from 3/4 -inch to 2 inches. You can install full bamboo …

  • Match the search results: As you see, there are so many ways you can add privacy into your chain link fence and stop prying eyes and outsiders from peeping through the fence. There are so many different plants you can plant to give yourself privacy. You can screw these in your existing fence and get the impression that your …

  • Quote from the source:

  • Author:

  • Evaluate 3 ⭐ (16707 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about DIY ideas for chain link fence slats and privacy Privacy slats turn chain link fences into a privacy fences. They also add color. You can choose slats to match or contrast with your chain link …

  • Match the search results: Privacy slats turn chain link fences into a privacy fences. They also add color. You can choose slats to match or contrast with your chain link fence. Create patterns by alternating several colors. Install slats on the entire fence, or use them only where you want a bit of color or privacy. These ac…

  • Quote from the source:

  • Author:

  • Evaluate 4 ⭐ (37814 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Chain Link Vs. Wood: Fence Style Pros and Cons – Ergeon From style considerations to cost, practicality and more- we dive into the pros and cons of chain link versus wood fences!

  • Match the search results: Wood fences require each fence board to be nailed to a rail/post individually, whereas chain link fences are sold in large rolls. This means that once the posts are installed, the chain link installation goes a bit more quickly.

  • Quote from the source:

  • Author:

  • Evaluate 4 ⭐ (29138 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Add Privacy to a Chain Link Fence – wikiHow Fortunately, you have a few ways to block outside views. Bamboo fences serve as inexpensive ways to create tall barriers, or you can build your own wooden slats …

  • Match the search results: Chain-link fences don’t give you much privacy, but there are some simple ways you can prevent prying eyes from peaking into your garden. You could try planting evergreen shrubs or bushes, such as arborvitae, along the fence. These plants won’t lose their leaves in winter, which means you’ll get year…

  • Quote from the source:

  • Author:

  • Evaluate 3 ⭐ (8640 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Apply Wood Fence Panels to Existing Chain Link Leave half an inch of each screw sticking out and attach these to the chain-link fencing itself using construction-grade zip ties. Finally, cover the gaps …

  • Match the search results: Though chain-link fencing is a ubiquitous fencing option, many homeowners would prefer to attach a privacy fence to chain-link fencing. Chain-link fencing, particularly the posts, can be difficult to remove, as the posts are sunk deep and are often filled with concrete. However, this also makes them…

  • Quote from the source:

Multi-read content how to cover chain link fence with wood

Chainlink fences everywhere will be disrupted after this message! Today is the day we share how we transformed a chain link fence into a wooden fence with wooden panels! It’s one of the easiest and most effective DIY fences out there and I’m very happy with the end result!

Reference….this is what our fence looks like now….

And this is what it looked like before…

We have a link fence that wraps around two sides of the concrete slab in our back yard. We call it the melon ball court because it’s not big enough for tennis, but we do a lot of biking, chalk drawing and playing with this bad boy. Part of the fence is so close to the Cypriot leyland trees to the left of this photo that we never see it. The other part is the overgrown honeysuckle (which I personally love in the summer!).

It’s a weekend warrior type project for us, and we’re going to Home Depot for the wood. First we will build all the panels to cover the fence so we assess everything in the lumber department.

When we figured out how many pieces of wood we needed and how much it would all cost, Jeremy said – why not just use these pre-assembled fence panels. Note that my father-in-law modeled these beautiful boards….

He lifted that thing like a pro

Since we really need it to be 8ft tall and they are only 6ft (dog ears on top) we will have to flip it on its side to get the required height. BUT since we were planning on doing a horizontal fence (to match our garden fence) this bad boy really needed to be transformed. The only real differences between the panels we’ve built are the price (these panels are about $7 more each) and they have nail holes in the front (where we’ll attach everything in the back to get that look purified).

The panels changed color a bit when we brought them home, but that didn’t bother us.

Another small detail to note is that the horizontal rear panel (which becomes a vertical rear support when we rotate the panel) protrudes from the bottom. So that would be some extra pruning needed.

When it comes to pruning, honeysuckle needs a little help in some areas to clear the fence before it can climb.

The boys also cleaned up the area. (and yes, it’s a Ryobi battery-powered lawn mower. It’s so light I can lift it and the people who work hard for me can push it. It’s easy!).

Okay, the real question people are asking is…..


Well we got a lot of advice from my friend in Iron

Technically they are called TWO LOTS. We bought the 2″ and used the external screws.

We also bought these lanyards (I call them lanyards) but they are for electrical use. We use these to bolt directly to the fence and then close the chain link to tighten it.

This is what they look like….

For our fence, we needed TONS of both. Here’s our initial shopping list – at least 48 c-brackets and all the selectors (which we replaced with the control panel), then a bunch of 1×3 markers.

The men had to hold the first panel in place to get it right and that required them to lift it higher (because the ground sank right there).

Jeremy turns around and uses the C-bracket around the horizontal piece of metal fence and attaches it to the vertical wooden backboard support.

Zip ties are much easier to photograph because they are not 8 feet tall and have lots of honeysuckle.

Jeremy made at least two C-brackets on each board and some zip ties. The other important thing to remember is that we still have the dog-eared part of the fence on the right side. To bring the two parts of the dog’s ear together will require a thicker piece of wood than to cover it. I will elaborate on this later.

Another part of this project that plagued our situation was that behind our fence was a steep hill. So it’s not like Jeremy just has to get up eight feet to attach the panels. He has to use a 12 foot ladder and hope it doesn’t slip under him :/

For panel installation, both people will carry and align the panel. Then Pepe will hold it in place while Jeremy moves to the other side, adjusting the ladder, making sure it’s flat (otherwise he has to come down, move to the other side, make an adjustment with wedges and back) , then attach the brackets and cords.

Also, I want healthy honeysuckle “spilled on top” because I like the smell and I like pulling them out and squeezing that sweet nectar….and I’m an aficionado too. Jeremy will therefore have to push back the top and tie a fence through the huge dense tree. He’s so good to me

Each panel becomes more fence.

To make it more intentional and less like vertical fence panels on the side, we needed to attach 1×3 panels that would cover the dog’s ears. This is the ultimate goal….

Fence panels are sometimes a little wider apart and sometimes not – that’s why you want to make sure the dog’s ears are all facing the same direction…otherwise it can create a gap or dog ears will show up even after having fixed 1 × 3.

Jeremy cuts them to size before tying them. Then he applied construction glue to the backs and secured them with the exterior finish nails.

Although the panels line up at the top and are made very similarly, you can see that the slats at the bottom don’t line up perfectly. It doesn’t bother us and we don’t notice it at all….but if you are that person, you know it bothers you…. Then this may not be the project for you. For us, this 1×3 breaks it up enough vertically that we can’t see it.

The end result is MAGNIFICENT. I mean seriously…..have you ever seen a nicer fence?! Say no. The answer is no.

It took about a day and a half for Jeremy and his dad to install it. We had 16 plates.

Next comes the coloring. We’ve walked you through this process and how we use Behr’s new Quick Dry Exterior Stain (you can use it on new AND slightly damp wood! This is a game changer for weekend warriors!)

The end result is REALLY pretty and I’m glad I got stuck in my gut about converting the chain link.

And just so you remember….we went from that….

For that reason….and no, I don’t regret the cascading honeysuckle. This is the icing on the cake !

Hope this helps anyone who might have a chain link situation. If you solve this problem in your own home, I would love to see your transformation. These things make my day! And here are the links to the products we used in this project. If you have any questions – ask them in the comments!

  • Exterior fence panels
  • Ryobi Brad the Nailer
  • Ryobi Caulking and Glue Gun
  • Loctite exterior glue
  • Double hole strap (c bracket)
  • 8 inch lanyard (zip lanyard)
  • Exterior 1×3


0To share

Popular questions about how to cover chain link fence with wood

Regular wooden fence panels can be screwed onto chain-link fences using U-brackets. Since these panels are been pre-constructed in a factory, there is no need to individually nail up boards. You will need access to the back side of the chain-link fence in order to attach the panels to the fence.

Wood fence panels are very durable, and if you use cedar, they’ll last nearly as long as the fence they are attached to. You can preserve wood panels by preventing ground contact. What is this? However, you’ll need to obtain a fence permit to attach these panels in front of your chain link fencing.

  1. 1) Plastic Privacy Slats for Chain Link Fences.
  2. 2) Plastic Privacy Fence Tape Weave.
  3. 3) Bamboo Rolls to cover up a chain link fence.
  4. 4) Artificial Hedge Rolls to add privacy to a chain link fence.
  5. 5) Fast-Growing Vines.
  6. 6) Planter Boxes along the Top of the Fence.
  7. 7) Lattice to cover your fence.
  8. 8) Windscreen Privacy Covers.

How do you attach wood to a metal fence?

Either a bracket and screws or just screws works great. When attaching wood to metal, make sure you use metal screws and pre-drill the holes. This will make the job a lot easier. You could also use self tapping screws that drill into the metal by themselves.

One of the more creative ideas for chain link fence privacy comes to us from Rachel Elmkies at This option is for the DIY crowd. As you can see from the photo, you can simply take cedar boards and lumber, pair them with metal pipe straps, and completely cover your chain link fence.

4 Easy Ways to Heighten a Chain Link Fence
  1. Add Welded Wire to the Top of Your Fence. One way to heighten your chain link fence is to add material to the top of your fence. …
  2. Add Mesh Cloth to the Top of Your Fence. …
  3. Add Tenax to Your Chain Link Fence. …
  4. Use PVC Piping or New Line Posts to Extend Fence Posts.
How to Add Privacy to a Chain Link Fence
  1. Install Chain Link Fence Slats. Chain link fence slats easily weave between the links on the fence. …
  2. Use Greenery Panels for a Natural Look. …
  3. Add Privacy Fence Screens to Your Chain Link Fence. …
  4. Raise Your Chain Link Fence Height. …
  5. The Ultimate Solution – Upgrade to a Privacy Fence.

How do you hide fence panels?

Paint your fence

A lick of paint or stain visually revives a fence in a flash. Pale hues make a space feel larger, while bright colours add excitement. But if you want your fence to disappear, go dark. This might be in the form of an emerald evergreen, such as yew, or a dark paint that blends into the shadows.

How do you attach a privacy screen to a fence?

How do I cover an existing fence?

There are several ways to cover a fence cheaply to give your fence a fresh look or to add more privacy:
  1. Dress-up or “camouflage” the fence with a fresh coat of paint.
  2. Replace broken or rotten boards with new ones.
  3. Plant vines, hedges, or bushes to grow in front of the fence.
  4. Cover with landscaping fabrics for privacy.
Chain link fences are typically less expensive than wood fences. That’s because the material is less expensive and the labor hours required for installation are usually less. However, add-ons like gates, vinyl coating or fabric screens will all increase the total cost per foot of a chain link fence.

How do you install a wood fence next fence?

How do you attach fence panels to an existing fence?

  1. Remove the old panels from the fence posts using a pry bar. …
  2. Attach the fence panel at the other rail in the same manner you attached the first. …
  3. Position the next panel so it’s flush against the end of the first panel. …
  4. Repeat the process until you’ve attached all your fence panels to your existing fence posts.
  1. Slide privacy slats into the links of the fence. Install privacy slats, into the mesh of the chain link fencing, to create privacy and add color. …
  2. Cover the chain link fence with climbing vines. …
  3. Painting chain link renews the look. …
  4. Rolled bamboo creates a serene wooded atmosphere.

Video tutorials about how to cover chain link fence with wood


keywords: #Homeimprovement, #buildingafence, #remove, #replace, #upgrade, #cheap, #chain-link, #woodfence, #fencestaining, #doityourself, #howtobuildafence, #howtomakeafence, #lowes, #homedepot

Start to finish process of removing old chain link and installing a 6 foot tall privacy fence without any digging or major modifications. This project cost us about $500 and I can’t believe how nice it turned out! Let me know if you have any questions. THIS WILL NEVER BE AS STRONG AS A FENCE WITH 4X4 POSTS CONCRETED IN PLACE. NOT RECOMMENDED IN HIGH WIND AREAS!

keywords: #Actioncamera, #POVcamera, #PlayMemoriesHome, #HDR-PJ230, #chainlink, #woodfence, #fence, #installingwoodoverchainlinkfence, #chainlinktowoodfenceconversion, #woodfencewithmetalpost, #woodfenceovermetalfence

Replaced old chain link fence with wooden fence using existing poles.

Just added a follow up video. Did a few more things to the fence.


keywords: #howto, #how-to, #diy, #doityourself, #howtoinstallfence, #howtoreplacefence, #homeimprovement, #homerepair, #fixit, #fixerupper, #privacyfence, #howtoinstallprivacyfence, #dogearfence, #chainlink, #replacechainlink, #buildfence, #carpentry, #fencing, #outdoor, #home, #depot, #easy, #repalce, #repiar, #vlog, #tutorial, #howtonewfence, #easyfencerepair, #easyreplacefence, #badneighbors, #hatemyneighbor

The Home Mender, Dustin Luby, shows us how to use and existing chain link fence and install a 6′ wood privacy fence right over top! Easy! Click the links below to see inside “Dustin’s Toolbox.” You can do it!



🛠 HOME MENDER DIGITAL REPAIR GUIDE – Now you can have the Home Mender in your pocket with the new digital repair guide from Retrieve, and take your fixability to the next level! EASY JUST GOT EASIER!


🏠 HOME MENDERS COMMUNITY – A place where do-it-yourselfers: home owners, tradesmen and entrepreneurs can exchange knowledge and experiences for all things home repair. YOU ARE WELCOME here. JOIN, LEARN, INSPIRE, GROW and DO. 👉


🚙 FIND OUT “What’s in my truck” and get the secrets that help me build a 6-figure Home Repair business. 👉


📕 CHECK OUT the HOME MENDERS E-COURSE to grow your FIXABILITY or to turn your side hustle into a SIX FIGURE BUSINESS 👉





1.Sweet Makita Cordless Drill


2. Makita Cordless skill saw


3. Makita Cordless reciprocating saw l


► BTW, Thanks for subscribing!



⭐ IMPORTANT: Follow The Home Mender so we can be best friends 😊








… AND don’t forget to visit our website:


🤔 You can learn more about The Home Mender 👷 here 👉



🎯 BONUS POINTS if you’re still reading!

Comment Below: Which home repair project should we do next??


As always thank you for the support. 🙏

Be safe and be well. ❤️

Let’s get to it!

The Home Mender 🛠️


DISCLAIMER: This description contains affiliate links that help support the channel and if you click on a product link, The Home Mender channel receives a small commission. Actually, if you buy anything that day, we do. It allows us to continue to make new videos like this one. I personally choose all of these links to help build confidence in and to educate my audience.

Thank you ALL so much for your support! Let’s get to it!

See more articles in category: FAQS