Top 19 how to refinish a cast iron tub yourself

Below is the best information and knowledge about how to refinish a cast iron tub yourself compiled and compiled by the hkfindall.com team, along with other related topics such as:: how to paint a cast iron tub, cast iron bathtub refinishing near me, cast iron tub for sale, cast iron tub refinishing companies, cast iron tub repair, cast iron tub reglazing near me, cast iron tub paint kit, spray paint for cast iron tub.

how to refinish a cast iron tub yourself

Image for keyword: how to refinish a cast iron tub yourself

The most popular articles about how to refinish a cast iron tub yourself

Back to Life: How to Paint and Refinish a Cast Iron Tub

  • Author: cheviotproducts.com

  • Evaluate 3 ⭐ (12689 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Back to Life: How to Paint and Refinish a Cast Iron Tub Bathtub refinishing involves sanding down the tub’s surface, filling in cracks and applying several coats of primer before rebuffing. Also known …

  • Match the search results: “Water-based latex and acrylic primers do not work on cast iron because the surface is too nonporous to absorb the primer adhesives. If you use either one of these primers on a cast iron surface, flaking will occur within months of application,” says Ryan Lawrence at eHow.

  • Quote from the source:

How to Refinish a Cast Iron Tub | DoItYourself.com

  • Author: www.doityourself.com

  • Evaluate 3 ⭐ (1421 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Refinish a Cast Iron Tub | DoItYourself.com How to Refinish a Cast Iron Tub · Remove the old drain and trip lever. · Cut away all the old caulk from around the tub. · Clean the tub thoroughly …

  • Match the search results: DoItYourself.com®, founded in 1995, is the leading independent
    home improvement and repair website. We welcome your comments and
    suggestions. All information is provided “AS IS.” Website operating
    problems contact [email protected]

  • Quote from the source:

How to refinish a cast iron bathtub – The Vanderveen House

  • Author: thevanderveenhouse.com

  • Evaluate 3 ⭐ (10142 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to refinish a cast iron bathtub – The Vanderveen House To refinish a cast iron bathtub, the main steps are to clean, strip, prep, and paint. You can often find these bathtubs for free, …

  • Match the search results: To refinish a cast iron bathtub, the main steps are to clean, strip, prep, and paint. You can often find these bathtubs for free, but I did pay money for this one because it came with the hardware and the shower curtain rod. In hindsight I should have just looked for a free one because the faucet is…

  • Quote from the source:

Question: How To Refinish A Cast Iron Tub Diy

  • Author: www.seniorcare2share.com

  • Evaluate 3 ⭐ (2699 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Question: How To Refinish A Cast Iron Tub Diy Remove Rust. The first thing you need to do is make sure your bath is free of rust. Prepare the surface. After removing the rust the surface needs to be …

  • Match the search results: A stainless steel tub will make a ticking or clacking sound. A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of …

  • Quote from the source:

How To Refinish A Cast Iron Tub Yourself – SeniorCare2Share

  • Author: www.seniorcare2share.com

  • Evaluate 3 ⭐ (19842 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How To Refinish A Cast Iron Tub Yourself – SeniorCare2Share How do I know if my tub is steel or cast iron? Is Reglazing a tub a good idea? What is the difference between reglazing and refinishing bathtub? How long does …

  • Match the search results: A stainless steel tub will make a ticking or clacking sound. A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of …

  • Quote from the source:

Is cast iron tub refinishing a viable choice?

  • Author: www.americarefinishingpros.com

  • Evaluate 3 ⭐ (14867 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Is cast iron tub refinishing a viable choice? The average time averages around 2 to 3 hours, including all the steps of the bathtub refinishing process: acid wash, deep clean-up, removal of …

  • Match the search results: Yes. The cast iron tub refinishing procedure also known as cast iron tub reglazing, not only is a viable alternative to replacement when the tub is old, stained, damaged, or simply doesn’t look good anymore but has become the number one choice for contractors nowadays when they are hired by a …

  • Quote from the source:

How to Refinish A Bathtub Yourself, Properly! | Bathworks®

  • Author: www.bath-works.net

  • Evaluate 3 ⭐ (13127 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Refinish A Bathtub Yourself, Properly! | Bathworks® DIY bathtub refinishing using Bathworks® Bathtub Refinishing Kits. … Whether you have a cast iron, steel, fiberglass, or plastic bathtub, tub/shower unit, …

  • Match the search results: Now it’s time to clean. Whether you have a cast iron, steel, fiberglass, or plastic bathtub, tub/shower unit, sink, shower stall, shower basin, etc… dump on plenty of Ajax or Comet cleaner and scrub! Pay special attention to any heavy soap scum areas. While the tub is still wet, scrub it…

  • Quote from the source:

How to Refinish a Bathtub: Pro Advice for DIYers – Bob Vila

  • Author: www.bobvila.com

  • Evaluate 4 ⭐ (37335 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Refinish a Bathtub: Pro Advice for DIYers – Bob Vila Want to replace your vintage cast iron bathtub? … more economical option to getting a fresh-looking bathtub is to refinish it yourself.

  • Match the search results: With the surface adequately scuffed and prepared, most kits require applying a primer or bonding agent. If the kit does include a primer, then use a small roller, paintbrush, or a paint sprayer to apply the primer to the surface of the bathtub. Bathtubs that are made of iron will typically require a…

  • Quote from the source:

How To Resurface Your Vintage Tub – Seattle Bathtub Guy

  • Author: seattlebathtubguy.com

  • Evaluate 4 ⭐ (30831 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How To Resurface Your Vintage Tub – Seattle Bathtub Guy If you have lucked out and found a vintage clawfoot or cast iron tub on the secondary (resale) market, you may feel like you’ve gotten a bargain. If the tub was …

  • Match the search results: Cast iron tubs typically have a smooth finished porcelain surface applied over the cast iron to create a softer, more visually pleasing internal texture and to protect the metal from oxidation from the water it’s meant to hold during your baths. Having that covering removed and replaced via re…

  • Quote from the source:

Should you refinish, reglaze or replace your bathtub? – TODAY

  • Author: www.today.com

  • Evaluate 3 ⭐ (16583 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Should you refinish, reglaze or replace your bathtub? – TODAY Learn about options for tub renovation — including bathtub … “For homeowners with antique claw-foot tubs made from heavy cast iron, …

  • Match the search results: If your existing bathtub is already in pretty good shape but is covered in minor stains, scratches or other surface imperfections, reglazing is a good option. It’s also ideal for certain types bathtubs. “For homeowners with antique claw-foot tubs made from heavy cast iron, it’s absolutely the way to…

  • Quote from the source:

Bathtub Refinishing For Older Homes

  • Author: specializedrefinishing.com

  • Evaluate 3 ⭐ (9825 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Bathtub Refinishing For Older Homes However, if you find yourself lucky enough to come into ownership of a cast-iron sink or a removable claw-foot tub, you’ll probably want to look into getting …

  • Match the search results: Bathtub refinishing in Cary NC is highly effective and low-cost when compared to replacing the bathtub. In order to replace your existing bathtub, you’ll have to cut it for it to fit through your bathroom door not to mention you will have to remove and replace the plumbing, surrounds, trim, an…

  • Quote from the source:

Painting Your Cast Iron Bath

  • Author: www.castironbath.co.uk

  • Evaluate 4 ⭐ (37852 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Painting Your Cast Iron Bath Painting Your Cast Iron Bath · 1. Remove Rust. The first thing you need to do is make sure your bath is free of rust. · 2. Prepare the surface.

  • Match the search results: For the best results we recommend ordering a cast iron bath expertly painted in a wide range of Farrow & Ball paint colours from Cast Iron Bath Company.  If you’ve already got the bath – and simply want to paint it – here’s the best way of going about it.

  • Quote from the source:

How to Restore the Cast Iron Tub of Your Dreams

  • Author: www.architecturaldigest.com

  • Evaluate 4 ⭐ (24842 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Restore the Cast Iron Tub of Your Dreams Designers spruce up antique cast iron tubs all the time—which means you can too!—so we’ve got tips on sourcing and and restoring.

  • Match the search results: Keeping the history of the home is what historic preservationist Brent Hull strives to accomplish in every project he undertakes. It's no surprise, then, that he has quite a bit of experience working with cast iron tubs. “Nearly every house we work on has cast iron tubs,” he says, “Remember, th…

  • Quote from the source:

Refinish a Rusty Cast Iron Bathtub – The Money Pit

  • Author: www.moneypit.com

  • Evaluate 3 ⭐ (6684 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Refinish a Rusty Cast Iron Bathtub – The Money Pit But the – you know, the enameling kits that you can do yourself are just not nearly as effective. Think of them as a glorified paint job for your tub. And with …

  • Match the search results:
    LESLIE: Well, and also it sounds like this – the whole item needs to be recast. You know, when you’re dealing with a cast iron tub, all of the finishes are baked on. So it’s probably, you know, best to have it professionally done and have it completely reenameled.

  • Quote from the source:

Refurbishing A Disgusting Old Clawfoot Tub – Probably This

  • Author: probablythis.com

  • Evaluate 3 ⭐ (4262 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about Refurbishing A Disgusting Old Clawfoot Tub – Probably This An old cast iron tub in need of some love · 3-4 quarts Citri-Strip Paint & Varnish Removal Gel + brush for application (for exterior paint …

  • Match the search results: An old cast iron tub in need of some love

  • Quote from the source:

Your Guide to Professional Tub Refinishing: Tips and Tricks

  • Author: everglazecoatings.com

  • Evaluate 4 ⭐ (31866 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Your Guide to Professional Tub Refinishing: Tips and Tricks However, it depends on the thickness of the glaze applied, the tub’s material (e.g., cast iron, porcelain), and the refinishing job’s …

  • Match the search results: Take note that you cannot use the bathroom right away after the tub refinishing because you want the glaze to adhere well and evenly on the surface. Most tub refinishing experts recommend using the tub no earlier than 24 hours after the refinishing service. However, it depends on the thickness of th…

  • Quote from the source:

Can You Paint A Cast Iron Tub? [Comprehensive Answer]

  • Author: answeregy.com

  • Evaluate 4 ⭐ (29441 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about Can You Paint A Cast Iron Tub? [Comprehensive Answer] How many times can you refinish a cast iron tub? Refinishing can be done by professional installation or by using a do-it-yourself reglazing kit …

  • Match the search results: Inside does not easily as the surface is made of the cast iron and paint allowing the key to make an iron it yourself. Can you paint a cast iron bathtub, photos and resistant though not been properly maintained antique clawfoot tub you could even coat of an enameled cast iron tubs are generally spea…

  • Quote from the source:

How to Paint the Bathtub (with Pictures) – wikiHow

  • Author: www.wikihow.com

  • Evaluate 4 ⭐ (31228 Ratings)

  • Top rated: 4 ⭐

  • Lowest rating: 2 ⭐

  • Summary: Articles about How to Paint the Bathtub (with Pictures) – wikiHow If your cast-iron tub is looking a little rundown, save some money and give it a new coat of … It’ll cost you about $450 to refinish your tub yourself, …

  • Match the search results: If your cast-iron tub is looking a little rundown, save some money and give it a new coat of paint rather than replacing it. After filling in any gaps or cracks, sanding down the interior and exterior, and giving it a few coats of acrylic urethane enamel paint, you’ll have a bathtub that looks brand…

  • Quote from the source:

How to Refinish a Vintage Claw Foot Tub – Roots & Boots

  • Author: rootsandboots.com

  • Evaluate 3 ⭐ (7201 Ratings)

  • Top rated: 3 ⭐

  • Lowest rating: 1 ⭐

  • Summary: Articles about How to Refinish a Vintage Claw Foot Tub – Roots & Boots We used mostly elbow grease plus a few basic supplies to take this old cast iron tub from “dingy rusty flaky” to “clean shiny white’.

  • Match the search results: We used mostly elbow grease plus a few basic supplies to take this old cast iron tub from “dingy rusty flaky” to “clean shiny white’.

  • Quote from the source:

Multi-read content how to refinish a cast iron tub yourself

Back to Life: How to Paint and Refinish Cast Iron Pipe

Painting a cast iron tub can bring new life and style to any bathroom. Whether the tub is rusty and chipping or just needs a refresh, it’s important to plan every step of the process. Here’s everything you need to know about painting a cast iron tub to keep it looking great for years.

What is Cast Iron Finish?

Tub remodeling involves sanding the surface of the tub, filling cracks, and applying several coats of primer before sanding again. Also known as glazing or painting, this process is just as transformative as a remodel, but with far less effort.Amanda Sims, digital design editor at Architectural Digest.

“A professional will come to your home and, after a thorough cleaning of the bathroom in question, will spray a very fine, opaque, shimmering glaze over the tile, sink, tub or all of the above – perfect. completely transformed the play in his handwriting.

A tub and tile refinishing professional can tell you if a tile refinish is worth it.Chuck Pistor,The president of bath and kitchen repair company Miracle Method, says tub refurbishing is like on-site recycling. It keeps building materials out of landfills and costs less than replacing the entire tub.

Finishing is a process that can be applied to certain bathroom elements. For example, an outdated bathtub and the surrounding tiles can be refinished at the same time. However, you can also be selective about what you want to replicate and what you want to keep or replace.

And it’s not just a one-time event. Tub refinishing is a process that can and should be repeated many times over the life of the tub. “Think of it like painting your nails on your nails. It’s fine for a while, but then as you go through your daily routine, you’ll have to fix it again,”Jennifer Wagner, a Home Depot home services merchant.

Things to consider when renovating a bathtub

There are many reasons why homeowners choose to repaint the bathtub. The bath should be a relaxation andrejuvenating experience, but it is difficult to take a shower if the bathtub is rusty or cracked. Repainting is a better option than trusting home improvement expertsLee WallenderExplain. He adds that rebuilding a tub only covers up the existing problems. Remodeling also costs the same or more than repainting the tub. One benefit of refinishing, however, is that the liner won’t wear off like a new finish. However, finishing is probably a better way to retain the character of aClassic or unique bathtub.

Time is another factor to consider when planning a bathtub renovation: it takes at least three days to dry, according to the author of Home Service.Jennifer Nounan. She points out that even if the tub is dry to the touch, it will take 72 hours to harden completely. It’s important to plan for this time because you don’t want to be stuck without a place to shower in your home. And, waiting for the finish to set can ensure your beautiful new finish doesn’t crack or warp from running water.

For homeowners concerned about the resale value of their home, retooling is a smart choice, explainsCasey Pollockto Maryland-based home improvement company Custom Tub and Tile. “Having a sparkling clean bathtub is a key part of impressing buyers and enticing them to make the right offer. A refurbished bathtub can mean more buyers and better deals.”

Plus, renovating a bathtub is a relatively simple way to add long-term value to your home. And even if you haven’t thought of selling it yet, a new tub can help you enjoy your own bathroom more than ever.

Choose paint and finish

Some tub materials work better with different paints,daisy cuinnto Hunker writes. This is mainly because the right paint can prevent rust, which tends to cause problems with cast iron bathtubs due to poor maintenance or simply the passage of time.

“Rust is the enemy, and if the exterior paint is worn, the rust (especially around the drains) can be pretty ugly,” says the historic ecologist.Brent Hull. He adds that restoring cast iron tubs with a new epoxy finish can prevent future rust. This is true for bothClassic bath and to recreatecan be purchased new.

Some paint compounds can actually damage cast iron.

“Water-based latex and acrylic primers don’t work on cast iron because the surface is too porous to absorb the primer adhesive. If you use either of these primers on cast iron surfaces, peeling will occur within months of application. »ryan laurentat eHow.

He suggests applying an anti-corrosion primer for galvanized metal to the tub after cleaning and sanding it. He explained that this base promotes acid bonding, which adheres well to cast iron. The result is a beautiful, durable gloss finish that won’t flake or peel.

Apartment Therapy WriterAshley Poskinused Rust-Oleum rubber primer and enamel paint on his tub. After three coats of paint, the tub body looks brand new. Poskin also recommends sandblasting the cast iron tub in preparation for painting, as this reduces imperfections and helps achieve a smooth surface.

It is also very important whether your bathtub has already been painted or not.Sarah Gibson, the founder of Room’s lifestyle blog for Tuesday, explains how she freshens up her cast iron bathtub. She points out that if the tub has already been painted, it will need to be stripped and sanded. It takes some extra work and money, but a resurfacing consultant can provide a quick assessment if you’re unsure. Gibson’s cast iron tub has never been painted before, so it can start cleaning and prepping for paint right away.

Vintage bath tube in a room with white wall. 3d rendering

Prepare the bath

The surface of the bathmust also be properly prepared,Dan Harmonwritten home and garden, DenGarden. First, the tub should be thoroughly cleaned and ventilated, followed by the removal of all equipment and hardware. If the shower door is stuck to the tub, Harmon advises removing it as well. Removal is easier than masking and painting around the bottom groove.

Tubs can be cleaned with commercial cleaners. The research team ofColorado bathtub repair. They recommend using phosphoric acid to prep the bath, to flush pores and create adhesion. Caulking should also be removed around the tub. Both steps are important for a clean, professional finish.

Proper removal of paint chips and flaking enamel is also important at this stage. Indeed, chipped and peeling paint can be the gateway to rust. General contractor says a hard metal brush is good for thisScott Sidler, owner of Austin Historical, a historical restoration company. Although his instructions involve repainting cast iron radiators, they can also be applied to cast iron bathtubs. He suggests scrubbing all tub surfaces until all peeling paint and dirt is removed. You can then use a rag to wipe away any remaining stains or paint stains.

After the tub is primed and repainted, the tub should be finished with a waterproof paint. This is what makes the glass porcelain bathtub so attractive, according to the local service platform teamBug. Once the tub is completely dry, the furniture can be returned to its original position and the tub is ready for bathing.

Image by: Monika Mlynek / © 123RF.com, Free-Photos, iriana88w / © 123RF.com

Related products

METRO one-piece bathroom faucet
integer (18181)

Single lever control
Flow rate: 2.2 GPM at 60 PSI
cUPC approved

product view

Rim Mount Tub Filler – Extra Tall
integer (17901)

product view

NUOVELLA Rectangular overflow washbasin
integer (18101)

Fire clay
The back is not glazed
Warnock Hersey Approved

Hole drilling

single hole
8″ drill –

product view

Popular questions about how to refinish a cast iron tub yourself

Can you refinish a cast iron tub yourself?

Is it worth refinishing a cast iron tub?

The cast iron tub refinishing procedure also known as cast iron tub reglazing, not only is a viable alternative to replacement when the tub is old, stained, damaged, or simply doesn’t look good anymore but has become the number one choice for contractors nowadays when they are hired by a homeowner to remodel a bathroom …

How much does it cost to refinish a cast iron tub?

$350 to $500
How much does it cost to refinish a cast iron tub? For an average cost of $350 to $500—a fraction of the $1,200 to $5,000 expense of a new cast-iron or steel tub installed—refinishers can make an antique fixture look brand new.

Can I resurface my bathtub myself?

A good refinishing job on a bathtub should be very glossy, smooth to the touch, and have a uniform appearance just like a new bathtub. You will never be able to duplicate the glossy finish and feel professional refinishing gives your bathtub, sink or countertops with a do-it-yourself bathtub refinishing kit!

Can you repaint a cast iron tub?

Painting over a cast iron tub can give new life and style to any bathroom. Whether the bathtub is rusted and peeling or simply in need of a refresh, it’s important to plan each step in the process.

Is Reglazing a tub a good idea?

Will it work for your tub? If your existing bathtub is already in pretty good shape but is covered in minor stains, scratches or other surface imperfections, reglazing is a good option. It’s also ideal for certain types bathtubs.

What is the difference between reglazing and refinishing bathtub?

So the main difference between the “bathtub refinishing” and “bathtub reglazing” is that the former refers to the entire restoration project and the latter refers to the commercial coating applied at the end of the process.

How long does tub refinishing last?

10 to 15 years
On average, a quality bathtub refinish can last 10 to 15 years with proper care and maintenance. Refinishing the tub helps protect the integrity, color, and finish.

How do you refinish a cast iron clawfoot tub?

How do you paint an old cast iron tub?

  1. Remove Rust. The first thing you need to do is make sure your bath is free of rust. …
  2. Prepare the surface. After removing the rust the surface needs to be degreased using sugar soap. …
  3. Prime the surface of the bath. Before applying a coloured paint you will need to use a metal primer. …
  4. Apply an undercoat. …
  5. Paint your bath.

Is my tub steel or cast iron?

1) Remove the overflow cover and popup lever from the head end of the tub and look at the edge of the hole. You should see black cast iron or bright steel. Also, if you remove the overflow cover, the material between it and the plumbing will be about 1/4 ” thick if it is cast iron. 1/16″ if it is steel.

What kind of paint do you use on a cast iron bath?

Whatever shade you chose, we recommend an acrylic, polyurethane or epoxy-based paint for added durability. There are some fabulous colours out there so don’t be afraid to be bold with your choice as (if you change your mind) the beauty of a cast iron bath is that you can just repaint it in another shade.

How do you prepare a tub for Reglazing?

Here are some tips to help you prepare your surface for reglazing.
  1. Eliminate Obstacles. Strip your tub bare. …
  2. Make the Surface Squeaky Clean. Making sure that your bathtub’s surface is clean of debris, dirt, and oil is of utmost importance in preparation. …
  3. Preparing Other Surfaces for Reglazing.

How do you update a bathtub without replacing it?

Below, we review some popular options for revamping your bathtub and giving it some much-needed pizzazz.
  1. (1) Reface the side of the bathtub with decorative elements. …
  2. (2) Paint the exterior of your claw-foot tub. …
  3. (3) Replace old caulk and reseal your tub. …
  4. (4) Put new tiling around your tub.

How do you resurface a bathtub?

Video tutorials about how to refinish a cast iron tub yourself

keywords:

keywords: #CastIron(Material), #refinishing, #howto, #clean, #install, #remove, #paint, #apply, #Cleaning, #Repair, #bathroom, #ideas, #remodeling, #old, #tub

Brand new and great video!!!: “How to install a toilet ”

-https://www.youtube.com/watch?v=vfVzwc9Lixs

I like bathtubs deep enough to actually take a bath, normally small tubs can serve an adult for that purpose. This old tub has the depth that you need to have a nice relaxation moment and that is why I want to show you how to extend the life of this heavy tub for many more years. Thank you for watching and please share, like and subscribe.

keywords: #chiasẻ, #điệnthoạicómáyảnh, #điệnthoạiquayvideo, #miễnphí, #tảilên

This video shares how to refinish a tub and is great for beginners. For more home improvement tips visit

-https://www.homerepairtutor.com/👍🏼

#tubrefinishing #bathroomremodel #homerepairtutor

Tub Refinishing for Beginners

0:25 Tools need for tub refinishing

2:44 How to remove bathtub overflow kit

3:30 How to remove caulk in bathtub

4:45 How to remove tub grout joint at floor tile

5:44 Set temperature in bathroom to 75 F

6:45 Sand bathtub with random orbital sander and etch with Lysol

7:28 How to remove tub drain without damaging tub

9:38 How to tape off floor and tub tile

12:49 How to mix epoxy tub refinisher

15:49 How to plan a tub refinishing project

17:46 How to apply epoxy tub refinishing product tub

35:36 How to remove tape from tub

38:27 How to caulk a bathtub

These supplies were used in our video:

Ekopel 2K Tub Refinishing Kit –

-https://amzn.to/2UImTLn

Frog Tape –

-https://amzn.to/3kHOjvr

Lysol Power Toilet Bowl Cleaner –

-https://amzn.to/3nwEW3r

DeWALT Random Orbital Sander –

-https://amzn.to/32QfYEi

White Scrub Doodles –

-https://amzn.to/3f6zH7p

Milwaukee Sawzall –

-https://amzn.to/38MZ7Wr

Milwaukee Torch Blade –

-https://amzn.to/3npIVyE

Heat Gun –

-https://amzn.to/3pyzizC

Newborn GTD Drip-Free Caulking Gun –

-https://amzn.to/3pxkj92

Some product links may be Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases at no additional cost to you.

Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.

Disclaimer:

Videos produced by Home Repair Tutor are provided for informational, educational, \u0026 entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.

keywords: #chiasẻ, #điệnthoạicómáyảnh, #điệnthoạiquayvideo, #miễnphí, #tảilên

Short video of the reglazing of an old cast iron tub using Ekopel 2k.

-https://www.amazon.com/dp/B07MCW3KJB/ref=cm_sw_em_r_mt_dp_U_r1.OCbSG93NS0

https://www.pinterest.com/pin/how-to-refinish-a-cast-iron-tub-yourself-for-less-than-50–388435536620928508/

See more articles in category: FAQS